E3S-R61 Transparent Object Detection Sensor NEW

E3S-R61 Omron Transparent Object Detection Sensor NEW

Product Description:

Retroreflective Type , Vertical Shape PBT Case , Pre-Wired Type , Sensing Distance 1m , NPN Transistor Output.

Specifications:

Sensing method	Retro-reflective with M.S.R. function
Sensing distance	0.1 m to 1 m (When using the E39-R1)
Standard sensing object	Opaque, LCD glass plate(thickness:0.7-mm): 75 mm dia. Min.
Directional angle	Sensor:3 to 10 DEG
	Reflector:30 DEG Min.
Light source	Red LED (700nm)
Power supply voltage	10 to 30 VDC (ripple(p-p) 10% included)
Current consumption	30mA DC Max.
Control output (Output type)	NPN open collector output
Control output (Load current)	0 to 100 mA
Control output (Residual voltage)	(DC) 1 V Max. (Load current 100mA Max.)
Operation mode	Light-ON/Dark-ON selectable
Load power supply voltage	30 VDC Max.
Protective circuit	Surge suppressor
	Output short-cut protection
	Power supply reverse polarity protection
	Mutual interference prevention
Response time	1 ms Max.
Sensitivity setting	2-turn endless adjustment (with indicator)
Ambient illuminance	Incandescent lamp:5000 lux Max., Sunlight:10000 lux Max.
Ambient temperature	Operating: 0 to 40 CEL
	Storage: -40 to 70 CEL
	(with no icing or condensation)
Ambient humidity	Operating: 35 to 85 %RH
	Storage: 35 to 95 %RH
	(with no condensation)
Insulation resistance	20 M OHM Min. at 500 VDC between charged parts and the case
Dielectric strength	1000 VAC at 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance	10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	500m/s2 for 3 times each in X, Y, and Z directions
Degree of protection	IEC60529: IP67
Applicable standard (EC Directive (Low Voltage Directive))	EN60947-5-2
Applicable standard (EC Directive (EMC Directive))	EMI: EN60947-5-2
	Emission Enclosure: EN55011 Group 1 class A
	EMS: EN60947-5-2
	Immunity ESD: IEC61000-4-2
	Immunity RF-interference: IEC61000-4-3
	Immunity Burst: IEC61000-4-4
	CE marking: Equipped
Connection method	Pre-wired models (Cable length: 2 m)
Indicator	Light indicator(red), Stability indicator(green)
Weight (packed state)	approx. 110 g
Material (case)	PBT
Material (lens)	Denatured Polyarylate
Material (mounting bracket)	Stainless steel(SUS304)
Accessories	Instruction manual, Mounting bracket(with screws), Sensitivity adjustment driver, Reflector