E3S-LS3N PCB Sensors NEW

E3S-LS3N Omron PCB Sensors NEW

Product Description:

Limited Reflective Type Pre-Wired Type , Sensing Distance 20 to 35mm , Red LED Light.

Specifications:

Sensing method	Limited Reflective
Sensing distance	20 mm to 35 mm (White paper 80*80mm)
Light source	Red LED (660nm)
Power supply voltage	12 to 24 VDC -10% to 10% (ripple(p-p) :10% Max.)
Current consumption	25mA DC Max.
Control output (Output type)	NPN open collector output
Control output (Load current)	0 to 100 mA
Control output (Residual voltage)	(DC) 1 V Max. (Load current 100mA Max.)
Operation mode	Light-ON
Load power supply voltage	24 VDC Max.
Protective circuit	Surge suppressor
	Output short-cut protection
	Power supply reverse polarity protection
	Mutual interference prevention
Response time	1 ms Max.
Ambient illuminance	Incandescent lamp:5000 lux Max.
Ambient temperature	Operating: -10 to 55 CEL
	Storage: -25 to 70 CEL
	(with no icing or condensation)
Ambient humidity	Operating: 35 to 85 %RH
	Storage: 35 to 95 %RH
	(with no condensation)
Insulation resistance	20 M OHM Min. at 500 VDC between charged parts and the case
Dielectric strength	1000 VAC at 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance	10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	500m/s2 for 3 times each in X, Y, and Z directions
Degree of protection	IEC60529: IP40
Applicable standard (EC Directive (Low Voltage Directive))	EN60947-5-2
Applicable standard (EC Directive (EMC Directive))	EMI: EN60947-5-2
	Emission Enclosure: EN55011 Group 1 class A
	EMS: EN60947-5-2
	Immunity ESD: IEC61000-4-2
	Immunity RF-interference: IEC61000-4-3
	Immunity Burst: IEC61000-4-4
	CE marking: Equipped
Connection method	Pre-wired models (Cable length: 2 m)
Indicator	Operation indicator(orange)
Weight (packed state)	approx. 80 g
Tightening torque	0.54 N.m Max. (with M3 screw)
Material (case)	ABS
Material (lens)	Methacrylate resin
Accessories	Instruction manual, M3 screw