E3JM-DS70M4T-G Photoelectric Sensors NEW

E3JM-DS70M4T-G Omron Photoelectric Sensors NEW

Product Description:

Two Models Contribute to Overall Cost Reduction.

E3JM Terminal Block Models

• Easy to wire and adjust.

E3JK Pre-wired Models

• Slim body is economically priced and full of functions..

Specifications:

Sensing method		Through-beam model	Retro-reflective model (with MSR function)	Diffuse-reflective model
Item	Model	E3JM-10?4(T)	E3JM-R4?4(T)	E3JM-DS70?4(T)
Sensing distance		10 m	4 m (When using E39-R1)	White paper (200 × 200 mm): 700 mm
Standard sensing object		Opaque: 14.8-mm dia. min.	Opaque: 75-mm dia. min.	--­
Differential travel		--­		20% max. of sensing distance
Directional angle		Both Emitter and Receiver 3° to 20°	1° to 5°	--­
Light source (wavelength)		Infrared LED (950 nm)	Red LED (660 nm)	Infrared LED (950 nm)
Power supply voltage		12 to 240 VDC±10%, ripple (p-p): 10% max. 24 to 240 VAC±10%, 50/60 Hz
Power con­sumption	DC	3W max. (Emitter 1.5 W max. Receiver 1.5 W max.)	2W max.
	AC	3W max. (Emitter 1.5 W max. Receiver 1.5 W max.)	2W max.
Control output		Relay output (E3JM-??M4 (T) model): SPDT, 250 VAC, 3A (cosφ=1) max., 5 VDC, 10 mA min. DC SSR output (E3JM-??S4 (T) model): 48 VDC, 100 mA max. (residual voltage: 2 V max.) Light-ON/Dark-ON selectable
Life expectancy (relay output)	Mechanical	50,000,000 times min. (switching frequency: 18,000 times/h)
	Electrical	100,000 times min. (switching frequency: 1,800 times/h)
Response time	Relay output	(E3JM-??M4 (T) models) Operate or reset: 30 ms max.
	DC SSR output	(E3JM-??S4 (T) models) Operate or reset: 5 ms max.
Sensitivity adjustment		--­		One-turn adjuster
Timer function *		ON-delay/OFF-delay/One-shot delay switch selectable Delay time: 0.1 to 5 s (adjustable), only for E3JM-???4T
Ambient illumination (Receiver side)		Incandescent lamp: 3,000 lx max.
Ambient temperature range		Operating: −25°C to 55°C, Storage: −30°C to 70°C (with no icing or condensation)
Ambient humidity range		Operating: 45% to 85% (with no condensation), Storage: 35% to 95% (with no condensation)
Insulation resistance		20 M? min. at 500 VDC
Dielectric strength		2,000 VAC, 50/60 Hz for 1 min.
Vibration resistance	Destruction	10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
	Malfunction	10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	Destruction	500 m/s2 3 times each in X, Y, and Z directions
	Malfunction	100 m/s2 3 times each in X, Y, and Z directions
Degree of protection		IEC 60529: IP66
Connection method		Terminal block
Weight (packed state)		Approx. 270 g	Approx. 160 g
Material	Case	ABS (Acrylonitril Butadiene Styrene)
	Lens	Methacrylic resin
	Cover	Polycarbonate
	Mounting Bracket	Iron
Accessories		Mounting Bracket (with screw), Nuts, Terminal Protection Cover, One set of cable connection nuts (exclud­ing -US Models), Instruction manual, Reflector (E39-R1: only for Retro-reflective Sensors)