E3G-L11 Photoelectric Sensors NEW

E3G-L11 Omron Photoelectric Sensors NEW

Product Description:

The Combination of the Hyper LED and Shine-proof Achieves both Ease-of-use and High Performance

· Hyper LED mounted. Finest pin-point beam in the industry allows detection of minute objects.

· Shine-proof optical system achieves stable detection of objects regardless of glossiness, color, material, surface irregularities, or inclination. 4% or less black/white error: (E3G-L1), 4% or less differential travel: (E3G-L1)

· Simple teaching of background or surface of conveyor. Double-bar display indicates excess gain at a glance.

· A line-up of M8 connector which ensures easy maintenance.

· Meets IEC IP67 requirements, thus resisting water..

Specifications:

Sensing method	Distance-setting
Sensing distance	5 mm to 50 mm (White paper 50*50mm)
Setting range	30 to 50 mm (White paper 50*50mm)
Spot size	1mm dia. Max. (At sensing distance of 38mm)
Differential distance	4% Max. of setting distance
Reflectivity characteristic (black-white error)	4% Max. of setting distance
Light source	Red LED (650nm)
Power supply voltage	10 to 30 VDC (ripple(p-p) 10% included)
Current consumption	55mA DC Max.
Control output (Output type)	NPN open collector output
Control output (Load current)	0 to 100 mA
Control output (Residual voltage)	(DC) 1.2 V Max. (Load current 100mA Max.)
Operation mode	Light-ON/Dark-ON selectable
Load power supply voltage	30 VDC Max.
Protective circuit	Surge suppressor
	Output short-cut protection
	Power supply reverce polarity protection
	Mutual interference prevention
Response time	1.5 ms Max.
Sensitivity setting	Teaching method
Other function	Fine distance adjustment
Ambient illuminance	Incandescent lamp:3000 lux Max., Sunlight:10000 lux Max.
Ambient temperature	Operating: -25 to 55 CEL
	Storage: -30 to 70 CEL
	(with no icing or condensation)
Ambient humidity	Operating: 35 to 85 %RH
	Storage: 35 to 95 %RH
	(with no condensation)
Insulation resistance	20 M OHM Min. at 500 VDC between charged parts and the case
Dielectric strength	1000 VAC at 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance	10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	500m/s2 for 3 times each in X, Y, and Z directions
Degree of protection	IEC60529: IP67
Applicable standard (EC Directive (Low Voltage Directive))	EN60947-5-2
Applicable standard (EC Directive (EMC Directive))	EMI: EN60947-5-2
	Emission Enclosure: EN55011 Group 1 classA
	EMS: EN60947-5-2
	Immunity ESD: IEC61000-4-2
	Immunity RF-interference: IEC61000-4-3
	Immunity Burst: IEC61000-4-4
	CE marking: Equipped
Connection method	Pre-wired models (Cable length: 2 m)
Indicator	Operation indicator(orange), Distance level indicator(green), Threshold indicator(red)
Weight (packed state)	approx. 64 g
Tightening torque	0.54 N.m Max. (with M3 screw)
Material (case)	PBT
Material (lens)	Methacylate resin
Material (cover)	Polyethyl sulfon
Material (mounting bracket)	Stainless steel(SUS304)
Accessories	Instruction manual, Mounting bracket(with screws)