E2E-C1C2 Proximity Switch NEW

E2E-C1C2 OMRON Proximity Switch NEW

Product Description:

Standard Sensors for detecting ferrous metals.

Wide array of variations. Ideal for a variety of applications.

Models with different frequencies are also available to prevent mutual interference.

Superior environment resistance with standard cable made of oilresistant PVC and sensing surface made of material that resists cutting oil.

Specifications:

Size		3 dia.	4 dia.	M5	5.4 dia.
Shielded		Shielded
Model		E2E-CR6C/B[]	E2E-CR8C/B[]	E2E-X1C/B[]	E2E-C1C/B[]
Sensing distance		0.6 mm ±15%	0.8 mm ±15%	1 mm ±15%
Set distance		0 to 0.4 mm	0 to 0.5 mm	0 to 0.7 mm
Differential travel		15% max. of sensing distance
Detectable object		Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Data Sheet.)
Standard sensing		Iron, 3 × 3 × 1 mm	Iron, 5 × 5 × 1 mm
object
Response frequency *		2 kHz	3 kHz
Power supply voltage		12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
(operating voltage
range)
Current consumption		10 mA max.	17 mA max.
Control	Load	Open-collector output,	Open-collector output, 100 mA max. (30 VDC max.)
output	current	80 mA max. (30 VDC max.)
	Residual	1 V max.	2 V max. (Load current: 100 mA, Cable length: 2 m)
	voltage	(Load current: 80 mA,
		Cable length: 2 m)
Indicators		Operation indicator (red)
Operation mode		C1/B1 Models: NO
(with sensing object		C2 Models: NC
approaching)		Refer to Data Sheet.
Protection circuits		Reverse polarity protection, Surge suppressor
Ambient		Operating/Storage: -25 to 70°C (with no icing or condensation)
temperature range
Ambient		Operating/Storage: 35% to 95% (with no condensation)
humidity range
Temperature		±15% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
influence
Voltage influence		±5% max. of sensing distance	±2.5% max. of sensing distance at rated voltage in the rated voltage ±15% range
		at rated voltage in the rated
		voltage ±10% range
Insulation resistance		50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		500 VAC, 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance		Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance		Destruction: 500 m/s2 10 times each in X, Y, and Z directions
Degree of protection		IEC 60529 IP66	IEC 60529 IP67, in-house standards: oil-resistant
Connection method		Pre-wired Models (Standard cable length: 2 m)
Weight (packed state)		Approx. 60 g
Materials	Case	Stainless steel (SUS303)		Nickel-plated brass
	Sensing	Heat-resistant ABS
	surface
	Clamping	Nickel-plated brass (E2E-X1C/B[] only)
	nuts
	Toothed	Zinc-plated iron (E2E-X1C/B[] only)
	washer
Accessories		Instruction manual

*The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.