E2A-M30KN20-M1-C1 E2A Cylindrical Proximity Sensor NEW

E2A-M30KN20-M1-C1 Omron E2A Cylindrical Proximity Sensor NEW

Product Description:

Safe Mounting with Greater Sensing Distance

• Ensures a sensing distance approximately 1.5 to 2m times larger than that of any conventional OMRON Sensor.

• Problems such as the collision of workpieces are eliminated.

• Full range of standard sizes (M8, M12, M18 and M30; both long and short barrels)

• Modular construction simplifies customization.

Specifications:

Size	M18		M30
Type	Shielded	Non-shielded	Shielded	Non-shielded	Non-shielded
Item	E2A-M18?S08-??-B? E2A-M18?S08-??-C?	E2A-M18?N16-??-B? E2A-M18?N16-??-C?	E2A-M30?S15-??-B? E2A-M30?S15-??-C?	E2A-M30KN20-??-B? E2A-M30KN20-??-C?	E2A-M30LN30-??-B? E2A-M30LN30-??-C?
Sensing distance	8 mm±10%	16 mm±10%	15 mm±10%	20 mm±10%	30 mm±10%
Setting distance	0 to 6.4 mm	0 to 12.8 mm	0 to 12 mm	0 to 16 mm	0 to 24 mm
Differential travel	10% max. of sensing distance
Target	Ferrous metal (The sensing distance decreases with non-ferrous metal.)
Standard target (mild steel ST37)	24×24×1 mm	48×48×1 mm	45×45×1 mm	60×60×1 mm	90×90×1 mm
Response frequency (See note 1.)	500 Hz	400 Hz	250 Hz	100 Hz	100 Hz
Power supply voltage (operating voltage range)	12 to 24 VDC. Ripple (p-p): 10% max. (10 to 32 VDC)
Current consumption (DC 3-wire)	10 mA max.
Output type	-B models: PNP open collector -C models: NPN open collector
Load current (See note 2.)	Load current (See note 2.)
Residual voltage	2 V max. (under load current of 200 mA with cable length of 2 m)
Indicator	Operation indicator (Yellow LED)
Operation mode (with sensing object approaching)	-B1/-C1 models: NO -B2/-C2 models: NC For details, refer to the timing charts.
Protection circuit	Output reverse polarity protection, Power source circuit reverse polarity protection, Surge suppressor, Short-circuit protection
Ambient air temperature	Operating: −40°C to 70°C, Storage: −40°C to 85°C (with no icing or condensation)
Temperature influence (See note 2.)	±10% max. of sensing distance at 23°C within temperature range of −25°C to 70°C ±15% max. of sensing distance at 23°C within temperature range of −40°C to 70°C
Ambient humidity	Operating: 35% to 95%, Storage: 35% to 95%
Voltage influence	±1% max. of sensing distance in rated voltage range ±15%
Insulation resistance	50 MΩ min. (at 500 VDC) between current carry parts and case
Dielectric strength	1,000 VAC at 50/60 Hz for 1 min between current carry parts and case
Vibration resistance	10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y and Z directions
Shock resistance	1,000 m/s2, 10 times each in X, Y and Z directions
Standard and listings	IEC60529: IP67, Degree of protection EN60947-5-2: EMC UL (CSA) [E196555] (See note 3.)
Connection method	-WP models: Pre-wired models (Standard length: 2 m) -M1 models: M12 4-pin connector models -M5 models: M8 3-pin connector models
Weight (packaged)  Pre-wired model	Approx. 160 g		Approx. 280 g	Approx. 280 g	Approx. 370 g
Weight M12 connector model	Approx. 70 g		Approx. 200 g	Approx. 200 g	Approx. 260 g
Case	Brass-nickel plated
Sensing surface	PBT
Cable	PVC
Clamping nut	Brass-nickel plated

Note:

1. The response frequency is an average value. Measurement conditions are as follows: standard target, a distance of twice the standard target distance between targets, and a setting distance of half the sensing distance.

2. When using any model at an ambient temperature between −40°C and −25°C and a power voltage between 30 and 32 VDC, use a load current of 100 mA max.,

3. UL (CSA) [E196555]: Use class 2 circuit only.