HPX-H1 AZBIL Photoelectric Sensors NEW

HPX-H1 AZBIL Photoelectric Sensors NEW

Product Description:

HPX Series General-use Fiber Optic Amplifier.

Overview?

The HPX Series Photoelectric Sensors offer high sensitivity over long scanning distances.

Benefits?

Quick response (50μs) plus mark dtectionself-diagnostic LEDs plus self-diagnostic output for high reliabilityFine-tuning of the sensitivity is accomplished using multi-turn potentiometer with indicator

Specifications:

Model		High Sensitivity	Low Hysteresis	Fast Response
Catalog Listing		HPX-H	HPX-A	HPX-F
Supply Voltage		10 to 30Vdc (Max. 10% ripple)
Operation Mode		Light-ON/Dark-ON, switch selectable
Output Form		NPN or PNP transistor open collector
Control Output	Switching Current	100mA max. (Resistive Load)
	Dielectric Strength	Max. 30V
	Voltage Drop	Max. 1V (at 100mA switching current)
Self Diagnostic Output	Switching Current	50mA max. (Resistive Load)
	Dielectric Strength	Max. 30V
	Voltage Drop	Max. 1V (at 50mA switching current)
Response Time		Max. 500µs for operation and recovery			Max. 50µs for operation
					Max. 70µs for reset
Sensitivity Adjustment		3-turn potentiometer with indicator
Light Emitter		Red LED
Indicator		Light-operated (LO) indicator: Red (ON during LO)Stability: Green (ON During stable LO or DO; Blinking during self-diagnostics
Timer Function		OFF delay: 40ms/instantaneous (Switch Selectable)
Ambient Light Immunity		Incandescent lamp: 5,000 lux max. Sunlight: 20,000 lux max.
Operating Temperature		-20 to +60°C
Insulation Resistance		20M?? min. (at 500Vdc)
Dielectric Strength		1000Vac, 50/60Hz for 1 minute between case and electrically live metal
Vibration Resistance		10 to 55Hz, 1.5mm peak-to-peak amplitude, 2 hrs in X, Y and Z directions
Shock Resistance		500m/s2, 3 times in X, Y and Z directions