FL7M-10T7D-CN AZBIL Proximity Switch NEW

FL7M-10T7D-CN AZBIL Proximity Switch NEW

Product Description: 

FL7M-T Series AC/DC 2-wire Cylindrical Proximity Sensors

Overview?

The FL7M-T Series is a no-polarity, 2-wire general pupose proximity sensor that is easy to use

Benefits?

2-wire type for both AC and DC greatly reduces wiring man-hours

Stable sensing area is displayed by the setting indicator (green/red LED)

Compact and space saving design

Sealed to IP67 Ingress Protection

Specifications:

Type		AC/DC 2-wire Cylindrical Proximity Sensors
Catalog Listing		FL7M-3T7HD(-CN,-CN03)	FL7M-7T7HD(-CN,-CN03)	FL7M-10T7HD(-CN,-CN03)
Actuation Method		High-frequency oscillation (shielded type)
Rated Sensing Distance		3 ±0.3mm	7 ±0.7mm	10 ±1mm
Standard Target Object		12 x 12 x 1mm iron	18 x 18 x 1mm iron	30 x 30 x 1mm iron
Oper. Voltage Range		40 to 250Vac, 20 to 250Vdc
ControlOutput	Switching Current	5 to 100mA (at 30Vdc supply voltage: 5 to 20mA)
	Volt. Drop	When AC power supply is used 10V max.  When DC power supply is used 6V max.
	Output Dielectric	250V (at both AC and DC power supplies)
Operating Frequency		When AC is used: 25Hz	When AC is used: 25Hz	When AC is used: 25Hz
		When DC is used: 1Khz	When DC is used: 500Hz	When DC is used: 400Hz
Operating Temperature		-25 to 70°C		-10 to 60°C
Insulation Resistance		50MΩ min. (by 500Vdc megger)
Dielectric Strength		4,000Vac, 50/60Hz for 1 minute
Vibration Resistance		10 to 55Hz, 1.5mm peak-to-peak amplitude, 2 hrs each in X, Y and Z directions
Shock Resistance		980m/s2 10 times in each X, Y and Z directions
Protective Structure		IP67
Circuit Protection		Surge absorption, load short-circuit protection, reverse connection protection circuit
Sensor Material	Case	Ni-plated brass
	Sensing Face	PBT