PFI25-8DN2 Autonics Proximity Sensor NEW

PFI25-8DN2 Autonics Proximity Sensor NEW

Product Description:

*Easy to mount in narrow space by Flat structure(Height:10mm)
*Improve the noise resistance by adopting dedicated IC(DC)
*Built-in protection circuit of reverse power polarity, surge protection,over current protection circuit
*Drive the load of 200mA directly within range of 12-24VDC power supply
*Available to check the status of operation by Red LED indicator
*Waterproof structure by IP67(IEC standard)
*Wide range of applications for replacement of micro switch, limit switch

Specifications:

Model	PFI25-8DN PFI25-8DN2 PFI25-8DP PFI25-8DP2	PFI25-8AO PFI25-8AC
Sensing distance	8mm
Hysteresis	Max. 10% of sensing distance
Standard sensing target	25×25×1mm(Iron)
Setting distance	0 to 5.6mm
Power supply (Operating voltage)	12-24VDC (10-30VDC)	100-240VDC (85-264VDC)
Current consumption	Max. 10mA	--------
Response frequency	200Hz	20Hz
Residual voltage	Max. 1.5V	Max. 10V
Affection by Temp.	±10% max. of sensing distance at +20? within temperature range of -25 to 70?
Control output	Max. 200mA	Max. 5 to 150mA
Insulation resistance	Min. 50MΩ (at 500VDC megger)
Dielectric strength	1500VAC 50/60Hz for 1 minute	2500VAC 50/60Hz for 1 minute
Vibration	1mm amplitude at frequency of 10 to 55Hz in each of  X, Y, Z directions for 2 hours
Shock	500m/s²(50G) in X, Y, Z directions for 3 times
Indicator	Power indicator: Green LED, Operating indicator: Yellow LED
Ambient temperature	e -25 to +70?, Storage: -30 to +80?
Ambient humidity	35 to 95%RH, Storage: 35 to 95%RH
Protection circuit	Reverse polarity protection, Surge protection, Overload & short-circuit protection	Surge protection
Protection	IP67(IEC)
Material	Case: Heat-resistant ABS,  Standard cable(Black): PVC
Unit weight( Approx. )	70g

Note: Environment resistance is rated at no freezing or condensation.