PR12-4AC Autonics Proximity Sensor NEW

PR12-4AC Autonics Proximity Sensor NEW

Product Description:

*Shorten the time of maintenance
*Improve the noise resistance by adopting dedicated IC
*Built-in protection circuit of reverse power polarity (DC 3-wire type)
*Built-in surge protection circuit
*Built-in over current protection circuit (DC type)
*Available to check the status of operation by Red LED indicator
*Protection structure IP67 (IEC standard)
*Wide range of applications for replacement of micro switches, limit switches

Specifications:

Model	PR?12-2A?	PR?12-4A?	PR?18-5A? PRW?18-5A?	PR?18-8A? PRW?18-8A?	PR?30-10A? PRW?30-10A?	PR?30-15A? PRW?30-15A?
Sensing distance	2mm	4mm	5mm	8mm	10mm	15mm
Hysteresis	Max. 10% of sensing distance
Standard sensing target	12×12×1mm(Iron)		18×18×1mm(Iron)	25×25×1mm(Iron)	30×30×1mm(Iron)	45×45×1mm(Iron)
Setting distance	0~1.4mm	0~2.8mm	0~3.5mm	0~5.6mm	0~7mm	0~10.5mm
Power supply (Operating voltage)	100-240VAC (85-264VAC)
Current consumption	Max. 2.5mA
Response frequency	20Hz
Residual voltage	Max. 10V
Affection by Temp.	±10% max. of sensing distance at +20? within temperature range of -25 to 70?
Control output	5~150mA		5~200mA
Insulation resistance	Min. 50MΩ (at 500VDC megger)
Dielectric strength	2500VAC 50/60Hz for 1 minute
Vibration	1mm amplitude at frequency of 10 to 55Hz in each of  X, Y, Z directions for 2 hours
Shock	500m/s²(50G) in X, Y, Z directions for 3 times
Indicator	Power indicator: Green LED, Operating indicator: Yellow LED
Ambient temperature	-25 to +70?, Storage: -30 to +80?
Ambient humidity	35 to 95%RH, Storage: 35 to 95%RH
Protection circuit	Surge protection
Protection	IP67(IEC)
Unit weight( Approx. )	PR:66g PRW:42g		PR:130g; PRL:150g PRW:87g; PRWL:112g		PR:185g; PRL:222g PRW:148g; PRWL:185g

Note: Environment resistance is rated at no freezing or condensation.