No comment |
>
Transducer/Sensor >
Photoelectric Sensors >
Photoelectric Switch >
PZ-G101P Photoelectric switch NEWPZ-G101P KEYENCE Photoelectric switch NEWProduct Description:
Built-in threaded sensor
Long-distance detection is twice that of conventional sensors
Before the light-receiving indicator to quickly align the optical axis
Do not need to screw the quick mounting bracketSpecifications:
Sensitivity adjustment
1-turn trimmer (230°)
Response time
500 μs
Operation mode
LIGHT-ON/DARK-ON (switch-selectable
Control output
Open collector output, 30 V max., 100 mA max., Residual voltage: 1 V max.
Protection circuit
Reversed polarity, overcurrent protection, surge absorber
Power supply
10 to 30 VDC including Ripple ± 10 % (P-P)
Enclosure rating
IEC, IP67 / NEMA: 4x, 6, 12 / DIN: IP69K
Ambient light
Incandescent lamp: 5,000 lux max., Sunlight: 20,000 lux max.
Ambient temperature
-20 to 55 °C (-4 to 130 °F), No freezing
Relative humidity
35 to 85 %, No condensation
Vibration
10 to 55 Hz, 1.5 mm double amplitude in the X, Y, and Z directions, 2 hours respectively
Shock
1000 m/s2 6 times in the X, Y, and Z directions
Housing, M18 nut(threaded models only)
Glass-fiber reinforced PBT
Trimmer
Glass-fiber reinforced polyamide (PA)
Case connection
Screw: Steel, zinc-nickel plated, Packing: Nitrile-butadiene rubber (NBR)
Cable (cable models / pigtail
quick disconnect models only)lyvinyl chloride (PVC)
Connector (pigtail quick
disconnect type only)Brass-nickel plated, Polybutyleneterephthalate (PBT), Polyvinyl chloride (PVC)
Tightening torque
Rectangular models (Mounting hole part): 0.5 N·m max.
Threaded models (front M18 part): 1.0 N·m max., (side slotted hole part): 0.5 N·m max.Accessories*2
Instruction manual, M18 nut x 2 pieces (nut thrubeam type),
M18 nut x 1 piece (other threaded models)Weight
Rectangular cable models: Approx. 60 g (Thrubeam-models transmitter: Approx. 50 g)
Rectangular connector models: Approx. 10 g
Rectangular M12 pigtail quick disconnect model: Approx. 30 g
Threaded cable models: Approx. 65 g (Thrubeam-models transmitter: Approx. 55 g)
Threaded connector models: Approx. 15 g
No comment |