| No comment |
Your Position: Home
> Control System > PLC > Delta PLC > DVPCOPM-SL PLC CANopen master communication module Delta NewCategories
View History
DVPCOPM-SL PLC CANopen master communication module Delta New
Description
DVPCOPM-SL Delta PLC 1Mbps CANopen master communication module Original brand new
Introduction
DVPCOPM-SL is a CANopen module operating on the left side of DVP-SV series PLC MPU. When DVP-SV is connected to CANopen network through DVPCOPM-SL, DVPCOPM-SL will serve as the data exchange interface between DVP-SV and other slaves on the bus. DVPCOPM-SL is in charge of sending the data in DVP-SV to the slaves on the bus, and at the same time collecting the data returned from each slave and sending them back to DVP-SV.
Specifications
CANopen connection
Transmission method | CAN |
Electrical isolation | 500VDC |
Interface | Removable connector (5.08mm) |
Transmission cable | 2-wire twister shielded cable with 2-wire bus power and drain |
Communication
Message type | PDO, SDO, SYNC (synchronous object), Emergency (Emergency object), NMT |
Baud rates | 10k, 20k, 50k, 125k, 250k, 500k, 800k, 1M bps (bit/sec) |
Electrical specification
Power voltage | 24VDC, supplied by internal bus from PLC MPU(-15%~ 20%) |
Power consumption | 1.7W |
Isolation voltage | 500V |
ƒ Environment
Noise immunity | ESD (IEC 61131-2, IEC 61000-4-2): 8KV Air Discharge, 4KV Contact Discharge EFT (IEC 61131-2, IEC 61000-4-4): Power Line: 2KV, Digital I/O: 1KV Analog & Communication I/O: 1KV Damped-Oscillatory Wave: Power Line: 1KV, Digital I/O: 1KV RS (IEC 61131-2, IEC 61000-4-3): 80MHz ~ 1,000MHz, 1.4GHz ~ 2.0GHz, 10V/m |
Operation | 0ºC ~ 55ºC (temperature); 50 ~ 95% (humidity); pollution degree 2 |
Storage | -25ºC ~ 70ºC (temperature); 5 ~ 95% (humidity) |
Shock/vibration immunity | International standard: IEC 61131-2, IEC 68-2-6 (TEST Fc)/IEC 61131-2 & IEC 68-2-27 (TEST Ea) |
Certificates | IEC 61131-2, UL508 |
Product Dimension
DVPCOPM-SL Delta PLC 1Mbps CANopen master communication module Original brand new
Introduction
DVPCOPM-SL is a CANopen module operating on the left side of DVP-SV series PLC MPU. When DVP-SV is connected to CANopen network through DVPCOPM-SL, DVPCOPM-SL will serve as the data exchange interface between DVP-SV and other slaves on the bus. DVPCOPM-SL is in charge of sending the data in DVP-SV to the slaves on the bus, and at the same time collecting the data returned from each slave and sending them back to DVP-SV.
Specifications
CANopen connection
Transmission
method
CAN
Electrical
isolation
500VDC
Interface
Removable connector
(5.08mm)
Transmission
cable
2-wire twister shielded cable with 2-wire bus power and drain
Communication
Message type
PDO, SDO, SYNC (synchronous object), Emergency (Emergency object), NMT
Baud rates
10k, 20k, 50k, 125k, 250k, 500k, 800k, 1M bps (bit/sec)
Electrical specification
Power voltage
24VDC, supplied by internal bus from PLC MPU(-15%~
20%)
Power consumption
1.7W
Isolation voltage
500V
ƒ Environment
Noise immunity
ESD (IEC 61131-2, IEC 61000-4-2): 8KV Air Discharge, 4KV Contact Discharge
EFT (IEC 61131-2, IEC 61000-4-4): Power Line: 2KV, Digital I/O: 1KV
Analog & Communication I/O: 1KV
Damped-Oscillatory Wave: Power Line: 1KV, Digital I/O: 1KV
RS (IEC 61131-2, IEC 61000-4-3): 80MHz ~ 1,000MHz, 1.4GHz ~ 2.0GHz, 10V/m
Operation
0ºC ~ 55ºC (temperature); 50 ~ 95% (humidity); pollution degree 2
Storage
-25ºC ~ 70ºC (temperature); 5 ~ 95% (humidity)
Shock/vibration
immunity
International standard: IEC 61131-2, IEC 68-2-6 (TEST Fc)/IEC 61131-2 & IEC
68-2-27 (TEST Ea)
Certificates
IEC 61131-2, UL508
Product Dimension
