DVPCOPM-SL PLC CANopen master communication module Delta New

DVPCOPM-SL Delta PLC 1Mbps CANopen master communication module Original brand new

Introduction

DVPCOPM-SL is a CANopen module operating on the left side of DVP-SV series PLC MPU. When DVP-SV is connected to CANopen network through DVPCOPM-SL, DVPCOPM-SL will serve as the data exchange interface between DVP-SV and other slaves on the bus. DVPCOPM-SL is in charge of sending the data in DVP-SV to the slaves on the bus, and at the same time collecting the data returned from each slave and sending them back to DVP-SV.

Specifications

CANopen connection

Transmission method	CAN
Electrical isolation	500VDC
Interface	Removable connector (5.08mm)
Transmission cable	2-wire twister shielded cable with 2-wire bus power and drain

Communication

Message type	PDO, SDO, SYNC (synchronous object), Emergency (Emergency object), NMT
Baud rates	10k, 20k, 50k, 125k, 250k, 500k, 800k, 1M bps (bit/sec)

Electrical specification

Power voltage	24VDC, supplied by internal bus from PLC MPU(-15%~ 20%)
Power consumption	1.7W
Isolation voltage	500V

ƒ Environment

Noise immunity	ESD (IEC 61131-2, IEC 61000-4-2): 8KV Air Discharge, 4KV Contact Discharge EFT (IEC 61131-2, IEC 61000-4-4): Power Line: 2KV, Digital I/O: 1KV Analog & Communication I/O: 1KV Damped-Oscillatory Wave: Power Line: 1KV, Digital I/O: 1KV RS (IEC 61131-2, IEC 61000-4-3): 80MHz ~ 1,000MHz, 1.4GHz ~ 2.0GHz, 10V/m
Operation	0ºC ~ 55ºC (temperature); 50 ~ 95% (humidity); pollution degree 2
Storage	-25ºC ~ 70ºC (temperature); 5 ~ 95% (humidity)
Shock/vibration immunity	International standard: IEC 61131-2, IEC 68-2-6 (TEST Fc)/IEC 61131-2 & IEC 68-2-27 (TEST Ea)
Certificates	IEC 61131-2, UL508

Product Dimension