No comment |
>
Transducer/Sensor >
Photoelectric Sensors >
Photoelectric Switch >
WLL170-2P430 SICK Fiber type Photoelectric switch NEWProduct Description:
Sender the LED is red for standard applications
Manual sensitivity adjustment
The Simple installation and alignment
Specifications:
Operating distance | 0 ... 160 mm1) | |
Fibre-optic cable (proximity system): | LL3-DK06 | |
Adjustment of operating distance | Poti, 10 revolutions2) | |
Scanning range max. typ. | 0 ... 4,000 mm | |
Fibre-optic cable (through-beam system) | LL3-TB02 and tip adapter LL3-TA01 | |
Operating range, recommended | 0 ... 700 mm | |
Fibre-optic cable (through-beam system) | LL3-TB01 | |
Sensitivity adjustment | Poti, 10 revolutions2) | |
Light source, light type | LED, red light, 660 nm3) | |
Depends on scanning range | ||
Approx. 65° see LL 3 fibre-optic data | ||
Supply voltage Vs | 10 ... 30 V DC4) | |
10 %5) | ||
≤ 30 mA6) | ||
Switching outputs | NPN: open collector: Q | |
| PNP: open collector: Q | |
Switching mode | Light/dark switching, switchable | |
Output current Iamax | ≤ 100 mA | |
≤ 0.25 ms7) | ||
2,000 Hz8) | ||
40 ms fix, selectable by sliding switch | ||
Off delay tOFF | ||
Connection type | Cable, Ø 3.8 mm, PVC, 2 m9) | |
VDE protection class |
| |
Circuit protection | Vs connections reverse-polarity protected / In-/outputs short-circuit protected / Interference pulse suppression / Outputs overcurrent and short-circuit protected | |
Enclosure rating | IP 6610) | |
Ambient temperature operation | -25 °C ... +55 °C | |
Ambient temperature storage | -40 °C ... +70 °C | |
Weight | Approx. 70 g | |
Housing material | ABS/PC |
Note:
1) Object with 90 % remission (based on standard white to DIN 5033)
2) Sensitivity scale 270°
3) Average service life 100,000 h at Ta = +25°C
4) Limit values
5) may not exceed or fall short of Vs
tolerances
6) without load
7) Signal transit time with resistive load
8) with light/dark ratio 1:1
9) do not bend below 0 °C
10) with correctly attached fibre-optic cable LL 3 and closed protection hood
WLL170-2P430 SICK Fiber type Photoelectric switch NEWProduct Description:
Sender the LED is red for standard applications
Manual sensitivity adjustment
The Simple installation and alignment
Specifications:
Operating distance
0 ... 160 mm1)
Fibre-optic cable (proximity system):
LL3-DK06
Adjustment of operating distance
Poti, 10 revolutions2)
Scanning range max. typ.
0 ... 4,000 mm
Fibre-optic cable (through-beam system)
LL3-TB02 and tip adapter LL3-TA01
Operating range, recommended
0 ... 700 mm
Fibre-optic cable (through-beam system)
LL3-TB01
Sensitivity adjustment
Poti, 10 revolutions2)
Light source, light type
LED, red light, 660 nm3)
Depends on scanning range
Approx. 65° see LL 3 fibre-optic data
Supply voltage Vs
10 ... 30 V DC4)
10 %5)
≤ 30 mA6)
Switching outputs
NPN: open collector: Q
PNP: open collector: Q
Switching mode
Light/dark switching, switchable
Output current Iamax
≤ 100 mA
≤ 0.25 ms7)
2,000 Hz8)
40 ms fix, selectable by sliding switch
Off delay tOFF
Connection type
Cable, Ø 3.8 mm, PVC, 2 m9)
VDE protection class
Circuit protection
Vs connections reverse-polarity protected / In-/outputs short-circuit protected / Interference pulse suppression / Outputs overcurrent and short-circuit protected
Enclosure rating
IP 6610)
Ambient temperature operation
-25 °C ... +55 °C
Ambient temperature storage
-40 °C ... +70 °C
Weight
Approx. 70 g
Housing material
ABS/PC
Note:
1) Object with 90 % remission (based on standard white to DIN 5033)
2) Sensitivity scale 270°
3) Average service life 100,000 h at Ta = +25°C
4) Limit values
5) may not exceed or fall short of Vs
tolerances
6) without load
7) Signal transit time with resistive load
8) with light/dark ratio 1:1
9) do not bend below 0 °C
10) with correctly attached fibre-optic cable LL 3 and closed protection hood
No comment |