WLL170-2P330 SICK Fiber type Photoelectric switch NEW

WLL170-2P330 SICK Fiber type Photoelectric switch NEW

Product Description:

Sender the LED is red for standard applications

Manual sensitivity adjustment

The Simple installation and alignment

 

Specifications:

Operating distance	0 ... 160 mm1)
Fibre-optic cable (proximity system):	LL3-DK06
Adjustment of operating distance	Poti, 10 revolutions2)
Scanning range max. typ.	0 ... 4,000 mm
Fibre-optic cable (through-beam system)	LL3-TB02 and tip adapter LL3-TA01
Operating range, recommended	0 ... 700 mm
Fibre-optic cable (through-beam system)	LL3-TB01
Sensitivity adjustment	Poti, 10 revolutions2)
Light source, light type	LED, red light, 660 nm3)
	Depends on scanning range
	Approx. 65° see LL 3 fibre-optic data
Supply voltage Vs	10 ... 30 V DC4)
	10 %5)
	≤ 30 mA6)
Switching outputs	NPN: open collector: Q
	PNP: open collector: Q
Switching mode	Light/dark switching, switchable
Output current Iamax	≤ 100 mA
	≤ 0.25 ms7)
	2,000 Hz8)
	40 ms fix, selectable by sliding switch
	Off delay tOFF
Connection type	Cable, Ø 3.8 mm, PVC, 2 m9)
VDE protection class
Circuit protection	Vs connections reverse-polarity protected / In-/outputs short-circuit protected / Interference pulse suppression / Outputs overcurrent and short-circuit protected
Enclosure rating	IP 6610)
Ambient temperature operation	-25 °C ... +55 °C
Ambient temperature storage	-40 °C ... +70 °C
Weight	Approx. 70 g
Housing material	ABS/PC

 

 

Note:

1) Object with 90 % remission (based on standard white to DIN 5033)

2) Sensitivity scale 270°

3) Average service life 100,000 h at Ta = +25°C

4) Limit values

5) may not exceed or fall short of Vs

tolerances

6) without load

7) Signal transit time with resistive load

8) with light/dark ratio 1:1

9) do not bend below 0 °C

10) with correctly attached fibre-optic cable LL 3 and closed protection hood