IM18-12BPS-ZW1 SICK Inductive Proximity sensor NEW

IM18-12BPS-ZW1 SICK Inductive Proximity sensor NEW

Product description:
Installed flush or flush in metal
NAMUR (EN50227)
High-frequency switching
Solid brass, nickel-plated shell with M18x1mm fine thread
Degree of protection IP67

Technical specifications? 

Sensing range Sn	12 mm
	20 mm
Electrical configuration	DC 3-wire
Supply voltage Vs	DC 10 ... 30 V
Ripple Upp	≤20%1)
Voltage drop Ud	≤2V2)
Power consumption	≤ 10 mA3)
Continuous current Ia	≤ 200 mA
Time delay before availability tv	≤ 100 ms
Hysteresis H, of sr	1 ... 15%
Repeatability R	≤ 5 % (Ub and Ta constant)4)
Temperature drift, of sr	± 10 %
EMC	According to EN 60947-5-2
Switching output	NPN
	PNP
Output function	Normally open5
Installation	Quasi-flush6
	Non-flush
Connection type	Cable, PVC, 2 m
	Connector, M12, 4-pin
Enclosure rating	IP 677)
Max. switching frequency	500 Hz
	200 Hz
Dimensions	M18 x 18)
Short-circuit protection	√ 9)
Reverse polarity protection	√
Power-up pulse suppression	√
Shock/vibration stress	30 g, 11 ms/10 ... 55 Hz, 1 mm
Ambient temperature Ta	–25 °C ... +70 °C
Housing material	Stainless steel, plastic
Tightening torque	30 Nm

 

Notes:

1) of ub

2) at Ia max

3) without load

4) of sr

5) other output functions available on request.

6) when mounting in conductible materials the sensors must be installed with a

distance A to the surface. A Steel, metal =4 mm/A Stainless steel = 1.5 mm

7) according to EN 60529

8) Thread diameter x pitch (mm)

9) (pulsed)