No comment |
>
Transducer/Sensor >
Photoelectric Sensors >
Photoelectric Switch >
IM18-08NDS-ZW1 SICK Inductive Proximity sensor NEWProduct description:
Installed flush or flush in metal
NAMUR (EN50227)
High-frequency switching
Solid brass, nickel-plated shell with M18x1mm fine thread
Degree of protection IP67
Technical specifications?
Sensing range Sn | 5 mm |
8 mm | |
Electrical configuration | DC 2-wire |
Supply voltage Vs | DC 10 ... 30 V |
Ripple Upp | ≤ 10% |
Voltage drop Ud | ≤ 2.8V1) |
Continuous current Ia | ≤ 100 mA |
Min. load current | ≥ 3 mA |
Residual current | ≤ 0.8 mA |
Time delay before availability tv | ≤ 50 ms |
Hysteresis H, of sr | 2 ... 10% |
Repeatability R | ≤ 2 % (Ub and Ta constant)2) |
Temperature drift, of sr | ± 10 % |
EMC | According to EN 60947-5-2 |
Output function | Normally open3) |
Installation | Flush |
| Non-Flush |
Connection type | Cable, PVC, 2 m |
Connector, M12, 4-pin | |
Enclosure rating | IP 674) |
Max. switching frequency | 300 Hz |
Dimensions | M18 x 15) |
Short-circuit protection | √ 6) |
Reverse polarity protection | √ |
Power-up pulse suppression | √ |
Shock/vibration stress | 30 g, 11 ms/10 ... 55 Hz, 1 mm |
Ambient temperature Ta | –25 °C ... +70 °C |
Housing material | Stainless steel, plastic |
Tightening torque | 30 Nm |
Notes:
1) at Ia max
2) of sr
3) normally closed function available on request
4) according to EN 60529
5) Thread diameter x pitch (mm)
6) (pulsed)
IM18-08NDS-ZW1 SICK Inductive Proximity sensor NEWProduct description:
Installed flush or flush in metal
NAMUR (EN50227)
High-frequency switching
Solid brass, nickel-plated shell with M18x1mm fine thread
Degree of protection IP67
Technical specifications?
Sensing range Sn
5 mm
8 mm
Electrical configuration
DC 2-wire
Supply voltage Vs
DC 10 ... 30 V
Ripple Upp
≤ 10%
Voltage drop Ud
≤ 2.8V1)
Continuous current Ia
≤ 100 mA
Min. load current
≥ 3 mA
Residual current
≤ 0.8 mA
Time delay before availability tv
≤ 50 ms
Hysteresis H, of sr
2 ... 10%
Repeatability R
≤ 2 % (Ub and Ta constant)2)
Temperature drift, of sr
± 10 %
EMC
According to EN 60947-5-2
Output function
Normally open3)
Installation
Flush
Non-Flush
Connection type
Cable, PVC, 2 m
Connector, M12, 4-pin
Enclosure rating
IP 674)
Max. switching frequency
300 Hz
Dimensions
M18 x 15)
Short-circuit protection
√ 6)
Reverse polarity protection
√
Power-up pulse suppression
√
Shock/vibration stress
30 g, 11 ms/10 ... 55 Hz, 1 mm
Ambient temperature Ta
–25 °C ... +70 °C
Housing material
Stainless steel, plastic
Tightening torque
30 Nm
Notes:
1) at Ia max
2) of sr
3) normally closed function available on request
4) according to EN 60529
5) Thread diameter x pitch (mm)
6) (pulsed)
No comment |