| No comment |
Categories
FS-T1P KEYENCE Fiber amplifier NEW
Description
FS-T1P KEYENCE Fiber amplifier NEW
Specifications:
Type | One-touch Calibration | ||||
Main unit | Color detection | 1-line expansion unit | 0-line expansion unit | ||
Model | NPN | FS-T1 | FS-T1G | FS-T2 | FS-T0 |
PNP | FS-T1P | - | FS-T2P | - | |
Light source | Red LED | Green LED | Red LED | ||
Response time | 250 µs | 410 µs to 1 ms (1) | |||
Operation mode | LIGHT-ON/DARK-ON (switch-selectable) | ||||
Timer function | ON-delay: 40 ms, OFF-delay: 40 ms, Timer OFF (switch selectable) | ||||
Control output | NPN or PNP:100 mA max. (40 V max.) Residual voltage: 1 V max. (2) | ||||
Power supply | 12 to 24VDC ±10% (3) | ||||
Ambient light | Incandescent lamp: 10,000 lux max. Sunlight: 20,000 lux max. | ||||
Ambient temperature | -10°C to +55°C (14 to 131°F), No condensation | ||||
Relative humidity | 35 to 85%, No condensation | ||||
1. The response speed varies depending on the number of expansion units connected.
2. The FS-T0/M0 have no control output.
3. Power to the FS-T0/M0 is supplied through the FS-R0. Power to the FS-T2/M2 is supplied through the FS-V1/T1/M1.
FS-T1P KEYENCE Fiber amplifier NEWSpecifications:
Type
One-touch Calibration
Main unit
Color detection
1-line expansion unit
0-line expansion unit
Model
NPN
FS-T1
FS-T1G
FS-T2
FS-T0
PNP
FS-T1P
-
FS-T2P
-
Light source
Red LED
Green LED
Red LED
Response time
250 µs
410 µs to 1 ms (1)
Operation mode
LIGHT-ON/DARK-ON (switch-selectable)
Timer function
ON-delay: 40 ms, OFF-delay: 40 ms, Timer OFF (switch selectable)
Control output
NPN or PNP:100 mA max. (40 V max.) Residual voltage: 1 V max. (2)
Power supply
12 to 24VDC ±10% (3)
Ambient light
Incandescent lamp: 10,000 lux max. Sunlight: 20,000 lux max.
Ambient temperature
-10°C to +55°C (14 to 131°F), No condensation
Relative humidity
35 to 85%, No condensation
1. The response speed varies depending on the number of expansion units connected.
2. The FS-T0/M0 have no control output.
3. Power to the FS-T0/M0 is supplied through the FS-R0. Power to the FS-T2/M2 is supplied through the FS-V1/T1/M1.
