FS-N12N KEYENCE Fiber amplifier NEW

FS-N12N KEYENCE Fiber amplifier NEW

Product Description:

Latest waterproof fiber optic sensor amplifier

IP66 standard is only one key to complete the set (new concept)

Automatic maintenance (new concept)

High-power to reduce the artificial time

The world's largest power beam, 250 times the brightness

The world's highest level of accuracy can be detected only ø0.6 μm diameter wire

The world's most lightfastness, 30,000 lux

Specifications:

 

Type				NEW IP66 Fiberoptic Amplifer, 1 output type
Cable/M8 connector				M8 connector *1
Main unit/expansion unit				Main unit
Model	NPN			FS-N15CN
	PNP			FS-N15CP
Control output				1 output
Monitor output (1-5V)				—
External input				1 input
Light source LED				Red 4-element LED (wavelength 630 nm)
Response time				50 μs (HIGH SPEED)/250 μs(FINE)/500 μs(TURBO)/ 1 ms (SUPER) /4 ms (ULTRA)/16 ms (MEGA)
Output toggle				Light-ON/Dark-ON toggle
Timer function				Timer OFF/OFF delay/ON delay/One-shot
Control output		NPN output		NPN open collector 24 V or less; maximum 100 mA or less, residual voltage 1 V or less
		PNP output		PNP open collector 24 V or less; maximum 100 mA or less, residual voltage 1 V or less
External input				Input time 2 ms (ON)/20 ms (OFF) or more, when selecting External calibration 25 ms (ON/OFF) or more
Expansion units				0 units (expansion not possible)
Protection circuit				Protection against reverse power connection, Output overcurrent, and Output surge
Number of interference prevention units				0 units (connection not possible)
Rating			Power voltage	12 to 24 V DC ± 10% ripple (P-P) 10% or less
			NPN	Normal: 900 mW or less (36 mA max. at 24 V, 48 mA max. at 12 V) *2 Econ on (ALL): 800 mW or less (32 mA max. at 24 V, 39 mA max. at 12 V) *2 Eco full: 470 mW or less (19 mA max. at 24 V, 23 mA max. at 12 V)
			PNP	Normal: 950 mW or less (39 mA max. at 24 V, 52 mA max. at 12 V) *2 Eco on (ALL): 850 mW or less (35 mA max. at 24 V, 44 mA max. at 12 V) *2 Eco full: 520 mW or less (21 mA max. at 24 V, 26 mA max. at 12 V)
Environmental resistance			Operating ambient luminance	Incandescent lamp: 20,000 lux or less, sunlight: 30,000 lux or less
			Operating ambient temperature	-20°C to +55°C -4°F to 131°F (no freezing)
			Operating ambient humidity	35 to 85%RH (no condensation)
			Vibration resistance	10 to 55 Hz compound amplitude 1.5 mm 0.06", 2 hours for each of X, Y, Z axis
			Shock resistance	500 m/s2, 3 times for each of X, Y, Z axis
			Enclosure rating	IP66 *3*4
Material			Case	Main unit: glass-reinforced PBT; Cover: Sulfonic resin
			Adapter	Glass-reinforced PBT
Case Dimensions				H 31.0 mm × W 13.0 mm × L 94.0 mm H 1.22" x W 0.51" x L 3.70"
Weight				App. 30g

Note:

*1 Use a cable of 30 m 98.43' or less.

*2 When the Power Mode is set to HIGH SPEED, 100 mW (4.0 mA) will be added.

*3 About the enclosure rating when a small-diameter fiber unit (the diameter of the cable is ø1.3 or ø1.0) is used.

IP66/IP65 cannot be satisfied when the type whose diameter is ø1.3 and terminal can be separated (FU-4F/ 66/91/93/43/63/63T etc.) is used.

When any small-diameter fiber units except for the above are used, IP65 is applied.

*4 In any of the following cases, the enclosure rating IP66/IP65 cannot be satisfied.

• When the Fiber Unit and KEYENCE’s M8 connector cable are not connected (Recommended conditions to tighten up the M8 connector: Tighten it by hand first.

Then retighten it as much as 1/16-1/8 of a rotation with pliers.)

• When the Fiber Unit and KEYENCE’s M8 connector cable are not connected

• When the dust cover of the Sensor Amplifier is open

• When there is debris in the dust cover

• When the waterproof adapter A/B are not used at the time of installation of a small-diameter fiber unit.