| No comment |
Your Position: Home
> Control System > PLC > Siemens PLC > 6ES7153-2AA02-0XB0 SIEMENS INTERFACE MODULE NewCategories
6ES7153-2AA02-0XB0 SIEMENS INTERFACE MODULE New
Description
6ES7153-2AA02-0XB0 SIEMENS INTERFACE MODULE New
SIEMENS INTERFACE MODULE 6ES7153-2AA02-0XB0
Product Description:
SIMATIC DP, ET 200M INTERFACE FOR MAX. 8 S7-300 MODULES, WITH REDUNDANCY, TIME STAMPING.
Features:
General information | |
Vendor identification (VendorID) | 801Eh |
Supply voltage | |
24 V DC | Yes |
permissible range (ripple included), lower limit (DC) | 20.4 V |
permissible range (ripple included), upper limit (DC) | 28.8 V |
External protection for supply cables (recommendation) | not necessary |
Mains buffering | |
Mains/voltage failure stored energy time | 5 ms |
Input current | |
Current consumption, max. | 550 mA; at 24 V DC |
Inrush current, typ. | 2.5 A |
I²t | 0.1 A²·s |
Output voltage | |
Rated value, 5 V DC | Yes |
Output current | |
for backplane bus (5 V DC), max. | 1 A |
Power losses | |
Power loss, typ. | 5 W |
Address area | |
Addressing volume | |
Outputs | 128 byte |
Inputs | 128 byte |
Hardware configuration | |
Number of modules per DP slave interface, max. | 8 |
Time stamping | |
Accuracy | 10 ms; 10 ms / 3 ms |
Number of message buffers | 15 |
Messages per message buffer | 20 |
Number of stampable digital inputs, max. | 128 |
Time format | RFC 1119 Internet (ISP) |
Time resolution | 1 ms |
Time interval for transmitting the message buffer if a message is present | 1000 ms |
Time stamp on signal change | rising / falling edge as signal entering or exiting |
Interfaces | |
Interface physics, RS 485 | Yes |
PROFIBUS DP | |
Node addresses | 1 to 125 permitted |
Automatic detection of transmission speed | Yes |
PROFIBUS DP, output current, max. | 90 mA |
Transmission rate, max. | 12 Mbit/s |
SYNC capability | Yes |
FREECE capability | Yes |
Direct data exchange (slave-to-slave communication) | Yes; Sender |
PROFIBUS DP | 9-pin sub D socket |
1st interface | |
DP slave | |
GSD file | (for DPV1) SIEM801E.GSD; SI01801E.GSG (for IM 153-2AA0x); SI02801E.GSG (for IM 153-2BA0x) |
Automatic baud rate search | Yes |
Communication functions | |
Bus protocol/transmission protocol | PROFIBUS DP to EN 50170 |
Isolation | |
Isolation checked with | Isolation voltage 500 V |
Degree and class of protection | |
IP20 | Yes |
Ambient conditions | |
Operating temperature | |
Min. | 0 °C |
max. | 60 °C |
Dimensions | |
Width | 40 mm |
Height | 125 mm |
Depth | 117 mm |
Weight | |
Weight, approx. | 360 g |
6ES7153-2AA02-0XB0 SIEMENS INTERFACE MODULE NewSIEMENS INTERFACE MODULE 6ES7153-2AA02-0XB0
Product Description:
SIMATIC DP, ET 200M INTERFACE FOR MAX. 8 S7-300 MODULES, WITH REDUNDANCY, TIME STAMPING.
Features:
General information
Vendor identification (VendorID)
801Eh
Supply voltage
24 V DC
Yes
permissible range (ripple included), lower limit (DC)
20.4 V
permissible range (ripple included), upper limit (DC)
28.8 V
External protection for supply cables (recommendation)
not necessary
Mains buffering
Mains/voltage failure stored energy time
5 ms
Input current
Current consumption, max.
550 mA; at 24 V DC
Inrush current, typ.
2.5 A
I²t
0.1 A²·s
Output voltage
Rated value, 5 V DC
Yes
Output current
for backplane bus (5 V DC), max.
1 A
Power losses
Power loss, typ.
5 W
Address area
Addressing volume
Outputs
128 byte
Inputs
128 byte
Hardware configuration
Number of modules per DP slave interface, max.
8
Time stamping
Accuracy
10 ms; 10 ms / 3 ms
Number of message buffers
15
Messages per message buffer
20
Number of stampable digital inputs, max.
128
Time format
RFC 1119 Internet (ISP)
Time resolution
1 ms
Time interval for transmitting the message buffer if a message is present
1000 ms
Time stamp on signal change
rising / falling edge as signal entering or exiting
Interfaces
Interface physics, RS 485
Yes
PROFIBUS DP
Node addresses
1 to 125 permitted
Automatic detection of transmission speed
Yes
PROFIBUS DP, output current, max.
90 mA
Transmission rate, max.
12 Mbit/s
SYNC capability
Yes
FREECE capability
Yes
Direct data exchange (slave-to-slave communication)
Yes; Sender
PROFIBUS DP
9-pin sub D socket
1st interface
DP slave
GSD file
(for DPV1) SIEM801E.GSD; SI01801E.GSG (for IM 153-2AA0x); SI02801E.GSG (for IM 153-2BA0x)
Automatic baud rate search
Yes
Communication functions
Bus protocol/transmission protocol
PROFIBUS DP to EN 50170
Isolation
Isolation checked with
Isolation voltage 500 V
Degree and class of protection
IP20
Yes
Ambient conditions
Operating temperature
Min.
0 °C
max.
60 °C
Dimensions
Width
40 mm
Height
125 mm
Depth
117 mm
Weight
Weight, approx.
360 g
