| No comment |
Your Position: Home
> Control System > PLC > Siemens PLC > 6ES7132-4BD30-0AA0 SIEMENS ELECTRONIC MODULE FOR ET 200S New6ES7132-4BD30-0AA0 SIEMENS ELECTRONIC MODULE FOR ET 200S New
Description
6ES7132-4BD30-0AA0 SIEMENS ELECTRONIC MODULE FOR ET 200S NewSIEMENS ELECTRONIC MODULE FOR ET 200S 6ES7132-4BD30-0AA0
Product Description:
SIMATIC DP, 5 ELECTRON. MODULES FOR ET 200S, 4 DO STANDARD DC 24V/2A, 15 MM WIDTH 5 PIECES PER PACKAGING UNIT.
Features:
Supply voltage
Reverse voltage protection
Yes; when using the same load voltage as on the power module
Load voltage L+
Rated value (DC)
24 V; From power module
Reverse polarity protection
Yes
Input current
from load voltage L+ (without load), max.
5 mA; Per channel
from backplane bus 3.3 V DC, max.
10 mA
Power losses
Power loss, typ.
1.6 W
Address area
Address space per module
with packing
2 bit
without packing
1 byte
Digital outputs
Number/binary outputs
4
Functionality/short-circuit strength
Yes; Per channel
Response threshold, typ.
2.8 to 7.2 A
Limitation of inductive shutdown voltage to
-55 to -60 V
Lamp load, max.
10 W
Controlling a digital input
Yes
Load resistance range
lower limit
12 Ω
upper limit
3400 Ω
Output voltage
for signal "1", min.
L+ (-1 V)
Output current
for signal "1" rated value
2 A
for signal "1" permissible range for 0 to 60 °C, min.
7 mA
for signal "1" permissible range for 0 to 60 °C, max.
2.4 A
for signal "0" residual current, max.
0.5 mA
Output delay with resistive load
"0" to "1", max.
200 µs
"1" to "0", max.
1.3 ms
Parallel switching of 2 outputs
for increased power
No
for redundant control of a load
Yes; per module
Switching frequency
with resistive load, max.
100 Hz
with inductive load, max.
2 Hz; 0.5 H
on lamp load, max.
10 Hz
Aggregate current of outputs (per group)
all mounting positions
up to 60 °C, max.
4 A
Cable length
Cable length, shielded, max.
1000 m
Cable length unshielded, max.
600 m
Isochronous mode
Isochronous operation (application synchronized up to terminal)
No
Interrupts/diagnostics/status information
Diagnostic messages
Diagnostic functions
No
Short circuit
Yes
Diagnostics indication LED
Status indicator digital output (green)
Yes
Parameter
Remark
1 byte
Galvanic isolation
Galvanic isolation digital outputs
between the channels
No
between the channels and the backplane bus
Yes
Permissible potential difference
between different circuits
75 VDC / 60 VAC
Isolation
Isolation checked with
500 V DC
Dimensions
Width
15 mm
Height
81 mm
Depth
52 mm
Weight
Weight, approx.
40 g
