| No comment |
Your Position: Home
> Control System > PLC > Siemens PLC > 6ES7132-4HB00-0AB0 SIEMENS ELECTRONIC MODULE FOR ET 200S New6ES7132-4HB00-0AB0 SIEMENS ELECTRONIC MODULE FOR ET 200S New
Description
6ES7132-4HB00-0AB0 SIEMENS ELECTRONIC MODULE FOR ET 200S New
SIEMENS ELECTRONIC MODULE FOR ET 200S 6ES7132-4HB00-0AB0
Product Description:
SIMATIC DP, 5 ELECTRON. MODULES FOR ET 200S, 2 DO RELAY 24V DC - 230V AC/5A,15 MM WIDTH FIRST-UP SIGNAL WITH LED SF (GROUP FAULT), 5 PIECES PER PACKAGING UNIT.
Features:
Supply voltage | |
Load voltage L+ | |
Rated value (DC) | 24 V; From power module |
Reverse polarity protection | Yes |
Input current | |
from load voltage L+ (without load), max. | 30 mA |
from backplane bus 3.3 V DC, max. | 10 mA |
Power losses | |
Power loss, typ. | 0.6 W |
Address area | |
Address space per module | |
with packing | 2 bit |
without packing | 1 byte |
Digital outputs | |
Number/binary outputs | 2 |
Functionality/short-circuit strength | No; external fuse, max. 6 A quick-acting |
Limitation of inductive shutdown voltage to | No |
Controlling a digital input | Yes |
Output current | |
for signal "1" minimum load current | 8 mA |
Parallel switching of 2 outputs | |
for increased power | No |
for redundant control of a load | No |
Switching frequency | |
with resistive load, max. | 2 Hz |
with inductive load, max. | 0.5 Hz |
on lamp load, max. | 2 Hz |
Relay outputs | |
Switching capacity of contacts | |
at ohmic load, up to 50 °C, max. | 5 A |
at ohmic load, up to 60 °C, max. | 4 A |
Thermal continuous current, max. | 5 A |
Cable length | |
Cable length, shielded, max. | 1000 m |
Cable length unshielded, max. | 600 m |
Isochronous mode | |
Isochronous operation (application synchronized up to terminal) | No |
Interrupts/diagnostics/status information | |
Diagnostic messages | |
Diagnostic functions | No |
Diagnostics indication LED | |
Status indicator digital output (green) | Yes |
Parameter | |
Remark | 3 bytes |
Behavior on CPU/Master STOP, channel-wise | Substitute a value/keep last value, 0/1 |
Galvanic isolation | |
Galvanic isolation digital outputs | |
between the channels | Yes |
between the channels and the backplane bus | Yes |
between the channels and the load voltage L+ | Yes |
Isolation | |
tested with | |
Channels against backplane bus and load voltage L+ | 1500 V AC |
Load voltage L+ against backplane bus | 500 V DC |
Dimensions | |
Width | 15 mm |
Height | 81 mm |
Depth | 52 mm |
Weight | |
Weight, approx. | 50 g |
6ES7132-4HB00-0AB0 SIEMENS ELECTRONIC MODULE FOR ET 200S NewSIEMENS ELECTRONIC MODULE FOR ET 200S 6ES7132-4HB00-0AB0
Product Description:
SIMATIC DP, 5 ELECTRON. MODULES FOR ET 200S, 2 DO RELAY 24V DC - 230V AC/5A,15 MM WIDTH FIRST-UP SIGNAL WITH LED SF (GROUP FAULT), 5 PIECES PER PACKAGING UNIT.
Features:
Supply voltage
Load voltage L+
Rated value (DC)
24 V; From power module
Reverse polarity protection
Yes
Input current
from load voltage L+ (without load), max.
30 mA
from backplane bus 3.3 V DC, max.
10 mA
Power losses
Power loss, typ.
0.6 W
Address area
Address space per module
with packing
2 bit
without packing
1 byte
Digital outputs
Number/binary outputs
2
Functionality/short-circuit strength
No; external fuse, max. 6 A quick-acting
Limitation of inductive shutdown voltage to
No
Controlling a digital input
Yes
Output current
for signal "1" minimum load current
8 mA
Parallel switching of 2 outputs
for increased power
No
for redundant control of a load
No
Switching frequency
with resistive load, max.
2 Hz
with inductive load, max.
0.5 Hz
on lamp load, max.
2 Hz
Relay outputs
Switching capacity of contacts
at ohmic load, up to 50 °C, max.
5 A
at ohmic load, up to 60 °C, max.
4 A
Thermal continuous current, max.
5 A
Cable length
Cable length, shielded, max.
1000 m
Cable length unshielded, max.
600 m
Isochronous mode
Isochronous operation (application synchronized up to terminal)
No
Interrupts/diagnostics/status information
Diagnostic messages
Diagnostic functions
No
Diagnostics indication LED
Status indicator digital output (green)
Yes
Parameter
Remark
3 bytes
Behavior on CPU/Master STOP, channel-wise
Substitute a value/keep last value, 0/1
Galvanic isolation
Galvanic isolation digital outputs
between the channels
Yes
between the channels and the backplane bus
Yes
between the channels and the load voltage L+
Yes
Isolation
tested with
Channels against backplane bus and load voltage L+
1500 V AC
Load voltage L+ against backplane bus
500 V DC
Dimensions
Width
15 mm
Height
81 mm
Depth
52 mm
Weight
Weight, approx.
50 g
