6ES7131-4BD00-0AA0 SIEMENS ELECTRONIC MODULE FOR ET 200S New

6ES7131-4BD00-0AA0 SIEMENS ELECTRONIC MODULE FOR ET 200S New

SIEMENS ELECTRONIC MODULE FOR ET 200S 6ES7131-4BD00-0AA0

Product Description:

SIMATIC DP, 5 ELECTRON MODULES FOR ET 200S, 4 DI STANDARD 24V DC, 15 MM WIDTH, 5 PIECES PER PACKAGING UNIT..

Features:

Supply voltage
24 V DC	Yes; From power module
Reverse polarity protection	Yes
Input current
from backplane bus 3.3 V DC, max.	10 mA
from supply voltage L+, max.	Dependent on encoder
Encoder supply
Output voltage	min. L+ (-0.5 V), under load
Output current, rated value	500 mA
Output current, permissible range	0 to 500 mA
Power losses
Power loss, typ.	0.7 W
Address area
Address space per module
with packing	4 bit
without packing	1 byte
Digital inputs
Number/binary inputs	4
Input characteristic curve acc. to IEC 61131, Type 1	Yes
Input voltage
Rated value, DC	24 V
for signal "0"	-30 to +5 V
for signal "1"	15 to 30 V
Input current
for signal "1", typ.	7 mA; at 24 V
Input delay (for rated value of input voltage)
for standard inputs
Parameterizable	No
at "0" to "1", min.	2 ms; typically 3 ms
at "0" to "1", max.	4.5 ms
at "1" to "0", min.	2 ms; typically 3 ms
at "1" to "0", max.	4.5 ms
Cable length
Cable length, shielded, max.	1000 m
Cable length unshielded, max.	600 m
Encoder
Connectable encoders
2-wire sensor	Yes
Permissible quiescent current (2-wire sensor), max.	1.5 mA
Interrupts/diagnostics/status information
Diagnostic messages
Diagnostic functions	No
Diagnostics indication LED
Status indicator digital input (green)	Yes
Galvanic isolation
Galvanic isolation digital inputs
between the channels	No
between the channels and the backplane bus	Yes
Permissible potential difference
between different circuits	75 VDC / 60 VAC
Isolation
Isolation checked with	500 V DC
Dimensions
Width	15 mm
Height	81 mm
Depth	52 mm
Weight
Weight, approx.	35 g