DVP08XP11T Delta PLC 4DI 4DO transistor output Digital Module Original brand new

DVP08XP11T Delta PLC 4DI 4DO transistor output Digital Module Original brand new 

Introduction

The DVP series provides different extension units with specific I/O (please refer to Section 1.1 for specifications).  The total input and output points can extend to 256 points. If 256 points are exceeded, the ERROR LED of the MPU will flash.

General Specification

Models Items	DVP08XN11 DVP08XP11R/T	DVP08XM11N DVP16XM01N	DVP-16XN01	DVP24XP01	DVP24XN01 DVP32XP01	DVP24XP00 DVP24XN00 DVP32XP00
Power Supply Voltage	24VDC (-15%~20%)					100~240VAC (-15%~20%) 50/60Hz +- 5%
Fuse Capacity	2A/250VAC
Power consumption (MAX)	5W	5W	6.5W	6.5W	8W	30VA
DC24V supply current	--	--	--	--	--	400mA
Power Protection	--					DC24V output with short-circuit protection
Withstand Voltage	1500VAC(Primary-secondary)1500VAC(Primary-PE)500VAC(Secondary-PE)
Retentive Power Interruption	Continues operation within 5ms					Continues operation within 10ms
Insulation Resistance	>5 M at 500VDC (Between all inputs/outputs and earth)
Noisy Immunity	ESD: 8KV Air Discharge EFT: Power Line: 2KV, Digital I/O: 1KV, Analog & Communication I/O: 250V Damped-Oscillatory Wave: Power Line: 1KV, Digital I/O: 1KV    RS: 26MHz~1GHz, 10V/m
Grounding	The diameter of grounding wire cannot be smaller than the wire diameter of terminals L and N (All DVP units should be grounded directly to the ground pole).
Operation/Storage Environment	Operation: 0~55 (Temperature), 50~95% (Humidity); Storage:  -25~70 (Temperature), 5~95% (Humidity) Pollution degree 2
Vibration /Shock resistance	Standard IEC1131-2, IEC 68-2-6[1]TEST Fc / IEC1131-2 & IEC 68-2-27 (TEST Ea)
Weight (g)	170/165	160/270	280	434	462/442	600/580