H5CN-XBN-Z AC100-240V Time Relay NEW

H5CN-XBN-Z AC100-240V OMRON Time Relay NEW

OMRON Time Relay H5CN-XBN-Z AC100-240V                      

Product Description:

Series version cover a wide range of rated times; 9.999 s, 99.99 s, 999.9 s, 99 min 59 s, and 99 hrs 59 min.

Selection of elapsed time indication, remaining time indication,contact output, and solid-state output types to suit requirements.

Power supply freely selectable within a range of 100 to 240 VAC, as well as 12 to 48 VDC.

Certified for UL and CSA safety standards

Specifications:

Ratings
Item	Contact output	Solid-state output
Rated supply voltage	100 to 240 VAC (50/60 Hz), 12 to 48 VDC	12 to 48 VDC (permissible ripple: 20% max.)
	(permissible ripple: 20% max.)
	(See note 1.)
Operating voltage range	85% to 110% of rated supply voltage
Power consumption	Approx. 12 VA at 240 VAC, 50 Hz	Approx. 2.5 W at 48 VDC
	Approx. 2.5 W at 48 VDC
Mounting method	Surface mounting or flush mounting
Display	7-segment LEDs (8-mm-high characters), UP indicator
Input method	Contact open and short-circuit input	Open-collector transistor ON/OFF input
Resetting system and gate input	Reset by power-OFF (See note 2.):
	min. power OFF time: 0.5 s
	External reset or gate (common to contact and solid-state inputs): min. reset input signal width: 0.02 s;
	residual voltage: 2 V max.
Output mode	N mode (Power ON-delay)
Control outputs	SPDT: 3 A at 250 VAC, resistive load (cosΦ = 1)	Open collector: 100 mA max. at 30 VDC max.
Ambient temperature	Operating:-10°C to 55°C (with no icing or condensation)
	Storage:-25°C to 65°C (with no icing or condensation)
Ambient humidity	Operating: 35% to 85%
Case color	Light gray (Munsell 5Y7/1)

Note:

1.Models with memory backup function are available only for AC power.

2.The H5CN-X[]NM cannot be reset by turning OFF the power.

Characteristics
Accuracy of operating time	±0.01% ±0.05 s max. (see note 1), ±0.005% ±0.03 s max. (see note 2) (see note 3)
Setting error
Influence of voltage
Influence of temperature
Insulation resistance	100 MΩ min. (at 500 VDC) (between current-carrying terminal and exposed non-current carrying metal parts, between power supply circuit and control output circuit)
Dielectric strength	2,000 VAC, 50/60 Hz for 1 min (between current-carrying terminal and exposed non-current-carrying metal parts, between power supply circuit and control output circuit)
Impulse withstand voltage	6 kV (between power supply terminal)
	6 kV (between current-carrying terminal and exposed non-current carrying metal parts)
Noise immunity	Square-wave noise by noise simulator
	AC: ±2 kV (between power supply terminals)
	DC: ±480 V (between power supply terminals), ±500 V (between input terminals)
Static immunity	Malfunction: 8 kV
Vibration resistance	Destruction:10 to 55 Hz with 0.75-mm single amplitude each in 3 directions for 2 hours each
	Malfunction:10 to 55 Hz with 0.5-mm single amplitude each in 3 directions for 10 minutes each
Shock resistance	Destruction:300 m/s2 3 times each in 6 directions
	Malfunction:100 m/s2 3 times each in 6 directions
Life expectancy	Mechanical:10,000,000 operations min.
	Electrical:100,000 operations min. (3 A at 250 VAC, resistive load)
Approved standards	UL508, CSA C22.2 No. 14
Weight	Approx. 200 g

Note:

1.When timer operation is started by power application.

2.When timer operation is started after a reset input has been applied.

3.These values represent the total accuracy of the timer including the repeat accuracy, setting error, and variation due to voltage and temperature changes. Note that they also comprise errors due to the rise time of the power source and the operating times of the internal and output circuits.