K3MA-L-C AC100-240V Digital Smart Sable NEW

K3MA-L-C AC100-240V OMRON Digital Smart Sable NEW

OMRON Digital Smart Sable K3MA-L-C AC100-240V  

Product Description:

Wide input range - select from two types of platinum-resistance thermometers and ten types of thermocouples.

Front-panel key operation for easy setting.

Average processing function suppresses flicker.

Temperature input shift and temperature unit selection functions.

Easy confirmation of max/min display.

Short 80-mm depth (measured from edge of face plate).

Finger protective cover (standard equipment) protects against electric shock.

Water- and dust-proof NEMA4X (IP66 equivalent) front panel.

Recognized to conform to U.S. and Canadian requirements under the Component Recognition Program of UL.

CE marking.

Specifications:

Ratings
	K3MA-L 100-240VAC,	K3MA-L 24VAC/VDC,
	K3MA-L-C 100-240VAC	K3MA-L-C 24VAC/VDC
Supply voltage	100 to 240 VAC	24 VAC (50/60 Hz), 24 VDC
Operating voltage range	85% to 110% of the rated supply voltage
Power consumption	6 VA max.	4.5 VA max. (24 VAC)
(under maximum load)		4.5 W max. (24 VDC)
Insulation resistance	20 MΩ min. (at 500 VDC) between external terminal and case.
	Insulation provided between inputs, outputs, and power supply.
Dielectric strength	2,000 VAC for 1 min between external terminal and case.
	Insulation provided between inputs, outputs, and power supply.
Noise immunity	±1,500 V on power supply terminals in normal or	±480 V on power supply terminals in normal mode.
	common mode.	±1,500 V in common mode.
	±1 μs, or 100 ns for square-wave noise with 1 ns.	±1 μs, or 100 ns for square-wave noise with 1 ns.
Vibration resistance	Vibration: 10 to 55 Hz, Acceleration: 50 m/s2
	5 min each in X, Y, and Z directions for 10 sweeps.
Shock resistance	150 m/s2 (100 m/s2 for relay contact outputs) 3 times each on 3 axes, 6 directions.
Ambient temperature	Operating: -10°C to 55°C (with no condensation or icing)
	Storage: -25°C to 65°C (with no condensation or icing)
Ambient humidity	Operating: 25% to 85% (with no condensation)
Approved safety standards	UL61010-1, conforms to EN61010-1 (Pollution degree 2/overvoltage category II)
	Conforms to VDE0106/P100 (finger protection)
EMC	(EMI) EN61326+A1 Industry
	Emission Enclosure: CISPR 11 Group 1 class A
	Emission AC Mains: CISPR 11 Group 1 class A
	(EMS) EN61326+A1 Industry
	Immunity ESD: EN61000-4-2: 4 kV contact discharge, 8 kV air discharge
	Immunity RF-interference: EN61000-4-3: 10 V/m (amplitude-modulated, 80 MHz to 1 GHz)
	Electrical Fast Transient Noise: EN61000-4-4: 2 kV (power line)
	Immunity Burst Noise: 1 kV line to line (I/O signal line)
	Immunity Surge: EN61000-4-5: 1 kV (power line), 2 kV line to ground (power line)
	Immunity Conducted Disturbance: EN61000-4-6: 3 V (0.15 to 80 MHz)
	Immunity Voltage Dip/Interrupting: EN61000-4-11: 0.5 cycle, 0, 180°, 100% (rated voltage)
Weight	Approx. 200 g

 

Characteristics
Indication accuracy	Thermocouple:
(at 23±5°C)	(±0.5% of indication value or ±1°C, whichever greater) ±1 digit max.
(See note.)	Platinum-resistance thermometer:
	(±0.5% of indication value or ±1°C, whichever greater) ±1 digit max.
Input	Thermocouple: K, J, T, E, L, U, N, R, S, B
	Platinum-resistance thermometer: JPt100, Pt100
Measurement method	Double integral method
Sampling period	500 ms
Display refresh period	Sampling period (sampling times multiplied by number of averaging times if average processing is selected.)
Max. displayed digits	4 digits (-1999 to 9999)
Display	7-segment digital display, Character height: 14.2 mm
Polarity display	"-" is displayed automatically with a negative input signal.
Zero display	Leading zeros are not displayed.
Input shift	Input shift equivalent to the setting value supported for all points within the sensor measurement range.
Hold function	Max hold (maximum value), Min hold (minimum value)
Hysteresis setting	Programmable with front-panel key inputs (0001 to 9999).
Other functions	Display color change (green (red), green, red (green), red)
	Average processing (simple average OFF/2/4/8 operations)
	Setting change lockout
	Parameter initialization
Output	Relay contact (SPDT)
Delay in comparative outputs	1 s max.
Degree of protection	Front panel: NEMA4X for indoor use (equivalent to IP66)
	Rear case: IEC standard IP20
	Rear case: IEC standard IP20
Memory protection	Non-volatile memory (EEPROM) (possible to rewrite 100,000 times)