| No comment |
Distance Meter FLUKE421D FLUKE NEW
Description
PLCAGE: Distance Meter FLUKE421D FLUKE NEW
Distance measurements:
Measuring accuracy up to 10 m (2 σ, standard deviation)
typically: ± 1.5 mm* (± 1/16 in*)
Power Range Technology™: Range (use target plate from about 80m)
0.05 m to 100 m
Smallest unit displayed 0.1 mm
Distance measurement ok
Minimum/maximum measurement, Continuous measurement ok
Area/volume calculation of room data ok
Addition / subtraction ok
Indirect measurement using Pythagoras ok
Tilt measurements: Tilt sensor: Accuracy (2 σ, standard deviation)
- to laser beam +/-0.3°
- to the housing+/- 0.3°
Indirect measurement using tilt sensor (direct horizontal distance) ok
Angle measurement using tilt sensor(± 45°) ok
General: Laser class II
Laser type 635 nm, < 1 mW
laser point (at distances)
6 / 30 / 60 mm
(10 / 50 / 100 m)
Automatic laser switch off
after 3 min
Automatic instrument
Switch off
after 6 min
Display illumination ok
Keypad illumination ok
Multifunctional endpiece ok
Timer (self-triggering) ok
Save constant value ok
Historical storage (20 values) ok
Tripod thread ok
Battery life, Type AAA, 2 x 1.5 V NEDA 24A/IEC LR03
up to 5 000 measurements
Protection against splashes and dust
IP 54, dust-proof, splash-proof
Dimensions 125 x 45 x 25 mm
Weight (with batteries) 110 g
Temperature range: Storage
-25 °C to +70°C
(13 Fahrenheit to +158 Fahrenheit)
Operation
-10 °C to +50 °C
(14 Fahrenheit to +122 Fahrenheit)
Maximum altitude 3500 m (AMSL)
Maximum relative humidity
85% at 20 Fahrenheit to 120 Fahrenheit (-7 °C to 50 °C)
Pollution degree 2
Safety
CAN/CSA-C22.2 No. 61010-1-04, UL Std. No. 61010-1 (2nd Edition), ISA-82.02.01, IEC Standard No. 61010-1:2001, and EN60825-1:2007 (Class II)
EMC 61326-1:2006
*maximum deviation occurs under unfavorable conditions such as bright sunlight or when measuring to poorly reflecting or very rough surfaces. Measuring accuracy between 10 m and 30 m may deteriorate to approx. ± 0.025 mm/m, for distances above 30 m to ±0.1 mm/m.
