USB-SC09-FX Mitsubishi Compatible PLC FX1S/1N/2N/3U programming Cable Original Brand New

USB-SC09-FX Mitsubishi PLC Programming Cable Driver Original Brand New

Introduction

USB-SC09-FX is the programming cable in which USB interface provides both the serial connection and RS422 signal conversion. Under the control of driver, the programming cable makes it possible to simulate the computer's USB interface as traditional serial (known as COM interface), thus various existing programming software, communication software, monitoring software and other applications can be normally used. The working power supply of this cable is directly from the USB port, but not the PLC programming interface. The two-color LED on the converter box indicates data’s transeiving status.

USB-SC09-FX is applicable to Mitsubishi FX series PLC which has the MD 8F round socket, such as FX2N/FX1N/FX0/FX0N/FX0S/FX1S/FX3U, and it can substitute the FX-232AW module. The largest communication distance is two kilometers. 

Please choose the USB-SC09 programming cable for Mitsubishi A and all FX series PLC (including the old products FX2/FX2C).

 

Functions

1, Support USB-SC09-FX operating system: Windows2000/XP

(WinNT4/95/98/Me/DOS not support ) 

2, Support USB-SC09-FX programming software version: FXGP / WIN

V1.0, GPP V4.0, GX Developer V7.0 and above.

3, Fully compatible with USB V1.1 norms and USB CDC V1.1 

4, USB-bus powered, with current consumption of 50 mA 

5, Baud rate: 300 bps ~ 1Mbps automatically adapt to the standard baud

rate 

5, Support UART data format: data bits: 5-6-7-8; stop bit: 1, 2; check-bit:

odd / even / no parity

6, Support long-distance communications, the largest communications is

two kilometers (9600 bps) 

7, Each PC only supports one USB cable programming 

8, Working temperature: -20 ~ +750C 

9, Cable length: 2.5m; Color: black