BFV00042GK Panasonic VFD input 1 Ph 220V 2.4A 0.4KW 250Hz 1 year Warranty

eatures

Ultra-compact

- Easy to operate using the integrated operating panel

- Cost effective

- Easy and accurate frequency control using PLC puls output

- Various types without and with brake included (1-phase)

- 8-speed control function

- Retry function

- Frequency increase, decrease and memory functions

using external switches

- Complete regeneration brake function

1-phase 230V AC Input types

MotorPower PN [kW]	Part No.
	Brake
	provided	not provided
0.2		BFV00022DK
0.4	BFV00042GK	BFV00042DK
0.75	BFV00072GK	BFV00072DK
1.5	BFV00152GK	BFV00152DK

3-phase 400V AC Input types

MotorPower PN [kW]	Part No.
0.75	BFV00074
1.5	BFV00154
2.2	BFV00224
3.7	BFV00374

Specifications

Input voltage		1-phase 230V AC	3-phase 400V AC
Applied motor output		0.2 to 1.5kW	0.75 to 3.7kW
Rated Output	Rated output voltage	3-phase 200 to 230V AC (proportional to power supply voltage)	3-phase 380 to 460V AC (proportional to power supply voltage)
	Overload current rating	150% of rated output current for 1 minute
Input Power Supply	Phases, voltage, frequency	1-phase 200 to 230V AC 50/60Hz	3-phase 380 to 460V AC 50/60Hz
	Tolerable voltage variations	+10%, –15% of rated AC input voltage
	Tolerable frequency variations	+-5% of rated input frequency
	Instantaneous voltage drop resistance capacity	Continuous operation at 165V or more. Continuous operation at less than 165V for 15ms	Continuous operation at 323V or more. Continuous operation at less than 323V for 15ms
Output Frequency	Output frequency range	0.5 to 250Hz
	Frequency display	Frequency display
	Frequency accuracy	+-0.5% of selected maximum set frequency (25+-10°C) for analogue setting
	Frequency setting resolution	Digital setting: 0.1Hz (1Hz over 100Hz), Analogue setting: 0.1Hz (50/60Hz mode)
Inverter control method		High carrier frequency sinusoidal PWM control (V/F control method)
Carrier frequency		Select from 9 types (The output current must be reduced for 12.5 and 15.0kHz) (0.8, 1.1, 1.6, 2.5, 5.0, 7.5, 10, 12.5, 15kHz	Select from 7 types (0.8, 1.1, 1.6, 2.5, 5.0. 7.5, and 10kHz) (The output current of 3.7kW must be reduced when set to 10kHz.)
Operation	Start/Stop	Operation panel buttons or input contact signal (wait time setting possible)
	Forward/Reverse	Operation panel buttons or input contact   signal (reverse rotation prohibit setting possible)
	Jog operation	Operating frequency: Optional setting for 0.5 to 250Hz, Acceleration/deceleration time: Optional setting each for 0.04 to 999 seconds
	Stop mode	Select from ramp-to-stop or coast-to-stop (selection changeover
	Reset function	Stop signal reset, external reset, panel reset (setting possible) and power supply reset
	Stop frequency	Optional setting from 0.5 to 60Hz
	Instantaneous power failure restart	Function OFF, and 0Hz restart, operating frequency restart (selection changeover)
	Retry function	Retry selection: Select function OFF and details of retry fault, No. of retries: Optional setting for 1 to 10 times
Control	Frequency setting signal	Local setting: Potentiometer, digital setting (operation panel) External analog setting signal: Potentiometer (10kW, 1/4  or more), 0 to 5V, 0 to 10V, 4 to 20mA (Connect a 200 , 1/4W or more external resistor) External digital setting signal: PWM signal (signal cycle: 0.9 to 1100ms), Frequency up SW, down SW, save SW signal
	Voltage/frequency characteristics	Base frequency: 50, 60Hz fixed and optional setting between 45 and 250Hz V/F curve: Constant torque, square torque pattern (selection changeover
	2nd voltage/frequency characteristics	Optional base frequency setting for 45 to 250Hz
	1st and 2nd torque boost level	Optional setting for 0 to 40%
	1st and 2nd accel./Decel. Time	0.04 to 999sec. (individual accel. and decel. Time setting), Accel./Decel. Characteristics: Linear
	Multi-speed frequency setting	Up to 8 preset frequency settings (optional setting)
	Skip frequency setting	Up to 3 place settings (skip frequency band setting from 1 to 10Hz)
	Upper and lower frequency setting	Optional setting from 0.5 to 250Hz
	Bias/gain frequency settings	Bias frequency: set from –99 to 250Hz, Gain frequency: set from 0 to 250Hz
	External stop function	Select from auxiliary stop or coast-to-stop (selection setting