FR-F740-S450K-CHT INVERTER

FR-F740-S450K-CHT MITSUBISHI INVERTER

Mitsubishi Inverter FR-F740-S450K-CHT PERFORMANCE

Multi-functional, the general application of the load

? Power range: 0.75 ~ 630KW
? simple magnetic flux vector control method to achieve outputtorque up to 3Hz 120%
? the use of optimum excitation control method to achieve higherenergy-saving operation
? Built-in PID, the inverter / frequency switching and multi-pumpcycle can be run function
? Built-in independent RS485 communication port
? Use long-life components
? Built-in noise filter (75K more)
? with energy monitoring, energy-saving effect at a glance

Note:1, The applicable motor capacity is based on the Mitsubishi 4-pole standard motors at maximum capacity applicable.2, level output voltage is 400V, the rated output capacity is 440Vwhen the capacity.3, is set to 3kHz carrier frequency in the case above, the inverteroutput current at rated current () within the above value, the carrier frequency is automatically reduced.4, is based on over-current and overload the inverter rated currentratio of percentage (%) indicated, repeated use, you must wait for the inverter and motor down to 100% load temperature below.5, The maximum output voltage can not exceed the power supplyvoltage, the power supply voltage below the maximum outputvoltage can be arbitrarily set, but the inverter output side of thepeak voltage of the supply voltage of 2 times.6, Cut the inverter front cover of the plug, pin installation of built-inoption, to become open (, IP00).7, power capacity with the power supply side impedance (including the input reactor and cables), the value changes.8, FR-DU07: IP40 (except PU interface part).