VFDB2022 Delta Frequency Inverter VFDB Series Braking Modules 22kW 200-400VDC Brand NEW

VFDB2022

Introduction

VFDB braking units are applied to absorb the motor regeneration energy when the three-phase induction motor stops by deceleration. With VFDB braking unit, the regeneration energy will be dissipated in dedicated braking resistors. To prevent mechanical or human injury, please refer to this instruction sheet before wiring. VFDB braking units are suitable for DELTA AC Motor Drives VFD Series 230V/460V/575V. VFDB braking units need to be used in conjunction with BR series braking resistors to provide the optimum braking characteristics

Specifications

VFDB Braking Units

Specification		230V Series		460V Series		575V Series
Model VFDB		2015	2022	4030	4045	5055
Max. Motor Capacity (KW)		15	22	30	45	55
Output Rating	Max. Discharge Current (A) 10%ED	40	60	40	60	60
	Continuous Discharge Current (A)	15	20	15	18	20
	Braking Start-up Voltage (DC)	330/345/360/380/440/415+-3V		660/690/720/760/800/830+-6V		950+-8V
Input Rating	DC Voltage	200—400VDC		400—800VDC		607-1000VDC
Min. Equivalent Resistor for Each Braking Unit		10 ohm	6.8 ohm	20 ohm	13.6 ohm	15.8 ohm
Protection	Heat Sink Overheat	Temperature over +950C (203oF)
	Alarm Output	Relay contact 5A120VAC/28VDC (RA, RB, RC)
	Power Charge Display	Blackout until bus (+~-) voltage is below 50VDC
Environment	Installation Location	Indoor (no corrosive gases, metallic dust)
	Operating Temperature	-100C~+500C (14oF to 122oF)
	Storage Temperature	-200C~+600C (-4oF to 140oF)
	Humidity	90% Non-condensing
	Vibration	9.8m/s2 (1G) under 20Hz 2m/s2 (0.2G) at 20~50Hz
Mechanical Configuration		Wall-mounted enclosed type IP50

Dimensions