Delta Inverter VFD drive VFD300VL43B-J 3Phase 380V 30KW 40HP 0~600Hz Injection molding machine

VFD300VL43B-J

VFD-VJ

  

Features

The Delta Hybrid Servo Drive VFD-VJ Series is designed with AC servo technology to drive hydraulic systems with perfect control of the drive, motor and hydraulic unit.

Specifications

?Field Oriented Control

?Suitable for both synchronous servo motors and asynchronous servo motors

?Built-in brake unit (up to 22kW)

?RS-485 communication interface (RJ-45) and standard MODBUS communication protocol

?Precise current detection for system protection with safety ensured

?New software for PC connection allows real time monitoring of AC motor drive status

Product Specifications

230V Class

Frame		C			D			E2
Model: VFD-_ _VL_ _A-J		055	075	110	150	185	220	300	370
Power (KW)		5.5	7.5	11	15	18.5	22	30	37
Horse Power (HP)		7.5	10	15	20	25	30	40	50
Output	Output Current for Continuous Operation Over 60 sec (A)	33	46	62	90	119	119	180	248
	Output Current for Continuous Operation Over 20 sec (A)	37	54	70	106	140	140	204	292
Power Supply	Input Current (A)	25	31	47	60	80	90	106	126
	Tolerable Input Voltage Variation	Three-phase 200~240V 50/60Hz
	Tolerable Supply Voltage Variation	10% (180~264V)
	Tolerable Supply Frequency Variation	5% (47~63Hz)
Weight (kg)		8	10	10	13	13	13	36	36

460V Class

Frame		C			D			E1			E2
Model: VFD-_ _VL_ _A-J		055	075	110	150	185	220	300	370	450	550	750
Power (KW)		5.5	7.5	11	15	18.5	22	30	37	45	55	75
Horse Power (HP)		7.5	10	15	20	25	30	40	50	60	75	100
Output	Output Current for Continuous Operation Over 60 sec (A)	21	27	36	46	58	62	102	124	155	187	255
	Output Current for Continuous Operation Over 20 sec (A)	25	32	42	54	68	78	120	146	182	220	300
Power Supply	Input Current (A)	14	18	24	31	39	47	56	67	87	101	122
	Tolerable Input Voltage Variation	Three-phase 380~480V, 50/60Hz
	Tolerable Supply Voltage Variation	10% (342~528V)
	Tolerable Supply Frequency Variation	5% (47~63Hz)
Weight (kg)		8	10	10	13	13	13	36	36	36	50	50

Common Features

Control method		SVPWM
Speed Detector		Resolver / Incremental Encoder
Speed Command Input		DC 0~10V, 3-point calibration of analog input is supported
Pressure Command Input		DC 0~10V, 3-point calibration of analog input is supported
Pressure Feedback Input		DC 0~10V
General Purpose Input Signal		5 ch DC24V 8mA
General Purpose Output Signal		2 ch DC24V 50mA, 1 ch Relay output
Analog Output Voltage		1 ch dc 0~10V
Optional Peripheral Accessories	Speed Feedback PG Card	Mandatory (Refer to Appendix A-5)
	Braking Resistor	Mandatory (Refer to Appendix A-1)
	Pressure Sensor	Mandatory (It must has an output signal ranging within 0~10V, which can be configured by Parameters 03-10~03-11; The maximum pressure can be configured by Parameter 00-08)
	EMI Filter	Optional (Refer to Appendix A-7)
Protection Feature	Motor Protection	Electronic thermal relay protection
	Over Current Protection	Over current protection is activated at 300% of the rated current
	Ground Leakage Current Protection	Activated when the leakage current is higher than 50% of the drive’s rated current
	Voltage Protection	Over Voltage Level: Vdc>400/800 V; Low Voltage Level: Vdc<200/400 V
	Input Power Supply Over Voltage Protection	Metal Oxide Varistor (MOV)
	Over Temperature Protection	Built-in temperature sensor
Environment	Protection Level	NEMA 1/IP20
	Operation Temperature	-10°C~45°C
	Storage Temperature	-20°C~60°C
	Humidity	Below 90% RH (non-condensing)
	Vibration	1.0G below 20Hz, 0,6G at 20~60 Hz
	Cooling System	Forced air cooling
	Installation Altitude	Altitude below 1,000m, keep from corrosive gasses, liquid and dust

Dimensions

 

Wiring