Delta Inverter VFD drive VFD015L21W 1Phase 220V 1.5KW 2HP 1~400Hz Wood cutting &Wire drawing

1 Phase 220V 1.5KW 2 HP Delta VFD AC Drive VFD015L21W 1~400Hz

 

Sub-fractional low cost AC Drive. Specifically designed for low horsepower applications with built-in EMI filter to efficiently reduce electromagnetic interference and to conform to the CE EMI directive

 

Specifications:

?Output frequency 1.0 ~ 400Hz

?Adjustable V/f curve

?Carrier frequency up to 10 kHz

?Auto torque boost and slip compensation

?Build-in MODBUS communication, baud rate up to 9600 bps

?Built-in EMI filter

 

Applications:

Simple wood cutting, conveyer belt, wire drawing machine, etc

 

 

 

Standard Specifications

Voltage Class			115V		230V
Model Name VFD-XXXLXXA/B			002	004	002	004	007	015
Applicable Motor Output(kW)			0.2	0.4	0.2	0.4	0.7	1.5
Output Rating	Rated Output Capacity(KVA)		0.6	1.0	0.6	1.0	1.6	2.7
	Rated Output Current(A)		1.6	2.5	1.6	2.5	4.2	7.0
	Max.Output Voltage(V)		3 Phase double the input		Proportional to input voltage
	Rated Frequency(Hz)		1.0~400Hz
Power	Rated Input Current(A)		6	9	4.9/1.9	6.5/2.7	9.7/5.1	*/9
	Input Voltage Tolerance		Single phase 100~120V 50/60Hz		Single/3-phase 200~240V 50/60Hz			3-phase 200~240V 50/60Hz
	Frequency Tolerance		+-5%
Control characteristics	Control system		SVPWM(Space Vector Pulse Width Modulation, carrier frequency 3kHz~10kHz)
	Output Frequency Resolution		0.1Hz
	Torque Characteristics		Including auto-torque and auto-slip compensation, the starting torque is 150% at 5Hz
	Overload Endurance		150% of rated current for 1 minute
	Accel/Decel Time		0.1~600Sec. (can be set indiviadually)
	V/F Pattern		Adjustable V/F curve
	Stall Prevention Level		20~200% of rated output current
Operating Characteristics	Frequency Setting	Keypad	Potentiometer-5K/0.5W, DC 0~+10V(input impedance 100K), 4~20mA(output Impedance 250 ohm), 3 multi-function inputs(3 preset speeds, JOG, UP/DOWN command), communication setting
		External Signal
	Operation Setting	Keypad	RUN/STOP keys
	Signal	External Signal	M0, M1,M2,M3 can be combined to offer varlous modes of operation, RS-485 communication port
	Multi-function Input Signal		Multi-step speed selection 0~3, Jog, accel/decal inhibit, first/second accel/decal selector, counter, PLC operation, external base block(NC, NO) selection
	Multi-function Output Signal		Ac Drive Operating, Frequency Attained, Non-zero speed, Base Block, Fault Indication, Local/Remote control indication, PLC Operation indication.
Other Function			AVR, S-curve, Over-Voltage Stall Prevention, DC Braking, Fault Records, Adjustable Carrier-Frequency, Over-Current Stall Prevention, Momentary Power Loss restart, Reverse inhibit, Frequency Limits, Patameter Lock/Reset.
Protection			Over Voltage, Over Current, Under Voltage, Overload, Overheating, Self-testing, Ground fault
Other			Built-in EMI Filter for Frame B(single phase)
cooling			Forced air-cooling
Environment	Installation Location		Altitude 1000 m or below, keep from corrosive gasses, liquid and dust
	Ambient Temperature		-100C to + 400C(Non-Condensing and not frozen)
	Storage Temperature		-200C to + 600C
	Ambient Humidity		Below 90% RH(non-condensing)
	Vibration		9.80665m/s2(1G) less than 20Hz,5.88m/s2(0.6Gat) 20 to 50Hz

Wiring

 

Dimensions