XGF-HO8A LS(LG) PLC XGT Series 8 Channels DC5/24V High Speed Counter Brand NEW

XGF-HO8A LS(LG) PLC XGT Series 8 Channels DC5/24V High Speed Counter Brand NEW

Features

1. 3 kinds of pulse inputs are available.

(a) If 1-phase is input

(1) Increasing/Decreasing function by means of the applicable program (1-multiplier, 2-multiplier)

(2) Increasing/Decreasing function by means of the B-phase input (1-multiplier, 2-multiplier)

(b) if 2-phase is input, 1-multiplier, 2-multiplier, 4-multiplier increasing/decreasing function by means of the difference in phase.

(c) if CW/CCW is input, increasing/decreasing function by means of A-phase or B-phase.  

2) Preset/Gate function by means of the applicable program.  

3)  6 additional functions are available such as Count Clear, Count Latch, Sampling Count, Input frequency Measure, Revolution Measure per unit time and Count Disable.

4) 7 kinds of compared signals can be outputted at output contact of the built-in transistor through compared based value (Min compared value, Max compared value) and current count value.  

Performance Specifications   

Items		Specifications
Number of channel		8
Count Input signal	Signal	A-phase, B-phase
	Input type	Voltage input(Open Collector)
	Signal level	DC 5/24V
Counter	Max count speed	200kpps
	Max count speed	Disable, 100kpps, 10kpps, 1kpps, 0.1kpps
	Count range	-2,147,483,648~2,147,483,647
Count type program setting)		Linear count(if 32-bit range exceeded, carry/borrow occurs)
		Ring count (repeated count within setting range)
Input mode (program setting)		1-phase input
		2-phase input
		CW/CCW input
Up/Down Setting	1-phase input	Increasing/decreasing operation setting by B-phase input
		Increasing/decreasing operation setting by program
	2-phase input	Automatic setting by difference in phase
	CW/CCW	A-phase input: increasing operation
		B-phase input: decreasing operation
Multiplier function	1-phase input	1/2 multiplier (program setting)
	2-phase input	1/2/4 multiplier (program setting)
	CW/CCW	1-multiplier
External output	Output points	1-point/channel: terminal output available
	Type	Select single-compared(>,>=,=,<= ,<) or section compared output (included or excluded)(program setting)
	Output type	Open collector output(Sink)
Function to display operation status	Input sign	A-phase, B-phase
	Output sign	Out
	Operation status	Module ready
Count enable		To be set through program (count available only in enable status)
Preset function		To be set through program
Additional Functions (program setting)		Count clear, Count latch, Sampling count (time setting value: 1~60000ms) Measurement of input frequency Measurement of counts per hour(time setting value: 1~60000ms) Count prohibited function(setting by internal input during count operation)
Terminal		80-pin connector
Internal consumed current		600mA

Parts Names