FP-X0 E40TD AFPX0E40TD Panasonic PLC 24VDC DC input 24 points Transistor(NPN) output 16 points FP-X0 Expansion Unit Orig

FP-X0 E40TD AFPX0E40TD Panasonic PLC 24VDC DC input 24 points Transistor (NPN) output 16 points FP-X0 Expansion Unit Original New

Feature

Super-high Processing Speed

Super-high speed of 80 ns/step for 0 to 3000 steps (ST command). 580 ns/step
processing speed for 3001 steps or more (Only for L40 and L60).

Program Memory

L14 and L30: 2.5 k steps
L40 and L60: 8 k steps

The Maximum Number of I/O Points

One control unit can be connected with up to 3 expansion units. Therefore, the maximum number can reach 150 points.
In addition, if the expansion FP0 adaptor is used, the maximum number can reach 216 points when the FP0R expansion unit is used. (Only for L40R, L40MR, L60R and L60MR)

Specifications

General specifications 

Items	Specifications
Operating temperature	0 to +550C
Storage temperature	-40 to +700C
Operating humidity	10 to 95% RH (at 250C, no condensation)
Storage humidity	10 to 95% RH (at 250C, no condensation)
Withstand voltage (Note 1) (Note 2)	Input terminals ⇔ Relay output terminals	2300 V AC, 1 minute
	All of the transistor output terminals ⇔ All of the relay output terminals
	All of the input terminals⇔ All of the power supply terminals and functional ground terminals
	All of the relay output terminals ⇔ All of the power supply terminals and functional ground terminals
	All of the transistor output terminals ⇔ All of the power supply terminals and functional ground terminals
	Power supply terminals ⇔ Ground terminals	1500 V AC,1 minute
	Input terminals ⇔ Transistor output terminals	500 V AC,1 minute
Insulation resistance (Note 1)	Input terminals ⇔ Output terminals	100 MΩ min. (500 V DC insulation resistance meter)
	All of the transistor output terminals ⇔ All of the relay output terminals
	All of the input terminals ⇔ All of the power supply terminals and functional ground terminals
	All of the output terminals ⇔ All of the power supply terminals and functional ground terminals
	Power supply terminals ⇔ Ground terminals
Vibration resistance	5 to 8.4 Hz, 3.5 mm amplititude in one direction, 1 scan/1 minute 8.4 to 150 Hz,fixed acceleration of 9.8 m/s2, 1 scan/1 minute 10 minutes in X,Y,Z direction each
Shock resistance	147 m/s2, 4 times in X, Y, Z directions each
Noise immunity	1500 V [p-p] pulse width 50 ns, 1 μs (Measured from nosie simulation method AC power supply termianls)
Operating environment	No corrosive gases or too much dust
Conformed EC Directives	EMC Directive: EN61131-2, Low Voltage Directive: EN61131-2
Overvoltage class	II
Pollution level	2

Note 1) The programmable port, RS485 communication port and the internal digital circuit part are non-insulation type.
Note 2) The cut-off current is 5 mA (The default value when shipped from the factory).

Expansion Units

Item	Power	Specifications	Part Number
FP-XO E24R	--	DC input 16 points; 2A relay output 8 points	AFPX0E24R
FP-XO E24T	--	DC input 16 points; Transistor(NPN) output 8 points	AFPX0E24T
FP-X0 E40RD	DC	DC input 24 points; Relay output 16 points	AFPX0E40RD
FP-X0 E40TD	DC	DC input 24 points; Transistor(NPN) output 16 points	AFPX0E40TD