FX-20P-E-SET0 Mitsubishi HANDY PROGRAMMING PANEL Original Brand New

 

FX-20P-E-SET0 Mitsubishi HANDY PROGRAMMING PANEL Original Brand New

Features

• FX-20P-E is a programming/monitoring unit of the compact hand-held type.

• The liquid crystal display unit of 16 characters × 4 lines displays the program, PLC operation status (monitoring), operation guidance and error messages.

• The FX-20P-E is equipped with online mode and offline mode functionality. In the online mode, the FX-20P-E directly accesses the memory with the connected PLC.

In the offline mode, the FX-20P-E accesses the RAM built in itself. In addition, because the FX-20P-E is equipped with the inbuilt large capacitor, it can back up programs written in the offline mode. (With power supply for 1 hour, the FX-20P-E can back up programs for a maximum of 3 days.)

• The FX-20P-E reads writes programs and executes a monitor display in list format.

• When an optional product is combined, the FX-20P-E can work as a ROM writer for memory cassettes available only with the FX Series PLC. Programs cannot be written or changed while the PLC is in the RUN status.

Specifications

Item		Specifications
Ambient temperature		0 to 40°C
Ambient humidity		35 ~ 85% Relative Humidity, No condensation
Vibration Resistance - intermittent vibration		Conforms to EN 68-2-6; 10 ~ 57 Hz: 0.075 mm Half Amplitude 57 ~ 150 Hz: 9.8 m/s2Acceleration Sweep Count for X, Y, Z: 10 times (80 min. in each direction)
Vibration Resistance - Continuous vibration		Conforms to EN 68-2-6; 10 ~ 57 Hz: 0.035 mm Half Amplitude 57 ~ 150 Hz: 4.9 m/s2Acceleration Sweep Count for X, Y, Z: 10 times (80 min in each direction)
Shock Resistance		Conforms to EN 68-2-27: 147m/s2Acceleration, Action time 11ms 3 times in each direction X, Y, and Z
Environment		Free from corrosive or flammable gas and excessive conductive dust
Supply voltage		5V DC+-5% supplied from PLC
Current consumption		150 mA*1
User memory capacity		RAM: 16K steps (8K steps in FX-20P-E main units that were manufactured in July 1997 or earlier with manufacturer serial No.s "77****" or earlier)
Memory backup for power failure		Memory backup capacitor After being powered for 1 hour it can retain internal device data for 3 days without externally supplied power
Display unit		Liquid crystal display unit with backlight
Display contents	Character matrix	1 character: 40 dots (8 × 5), bottom 5 dots of each line (1 × 5 dots) are used for the prompt
	Number of characters	64 characters (16 characters × 4 lines)
	Character types	Alphanumeric
Keyboard		35 keys
Inbuilt interface	PLC interface	In conformance to EIA and RS422, connected to FX Series PLC with cable FX-20P-CAB or FX-20P-CAB0.
	Extension interface	Connected to extension module
ROM writer function		Available when dedicated module is connected (write, read, collation and deletion check)

*1 When FX-20P-RWM is used, the current is 180mA.