14DI 10DO Transistor 100?40VAC Mitsubishi FX3GA-24MT-CM PLC for upgrade FX1N Original Brand New

FX3GA-24MT-CM Mitsubishi Micro PLC AC100 ~240V Original Brand New

General Specification

Item	Specification
Environment Temperature	0 ~ 550C…when operating; -25~750C… when storing
Environment Humidity	Relative Humidity 5~95%RH(no condensation)…when operating
Anti-Vibration*1	(DIN installing) 10 ~57H: Amplitude 0.035mm, 57 ~ 150Hz: Acceleration 4.9m/s2 (Install directly) 10 ~ 57Hz Amplitude 0.075mm, 57 ~ 150Hz Acceleration  9.8m/s2 X,Y,Z Dimension every 10 times(total every 80 minutes)
Shockproof	Installing 147m/s2 operating time 11ms 3 axes dimension every 3 rounds
Noise Tolerant	Noise tolerant voltage 1000Vp-p Noise magnitude 1us, Raise from 1ns, according to frequency 30~100Hz noise monitor
High pressure Resistance	AC 1.5kV, AC500V one minute	Between every terminal and grounding terminals
Insulating Resistance	DC 500V over 50M ohm
Grounding	Kind D grounding (grounding resistance less than 100 ohm ) cannot ground with great power system at the same time
Operating environment air	Noncorrosive, flammable gas, electric conductive dish is ok
Operation height	Less than 2000m

*1 Take IEC61131-2 for judgment standard

Electronic Specifications

Item	Specification
	FX3GA-24M__-CM	FX3GA-40M__-CM	FX3GA-60M__ -CM
Rated Voltage	AC100 ~240V
Voltage	AC85~264V
Rated frequency	50/60Hz
Allowing power-off in second	Under 10ms, and the operation carries on
Main fuse	250V 1A	250V 3.15A
Impacting current	20A at its maximum, <5ms/AC 100V, 50A maximum <5ms/AC200V
Power consuming	32W	37W	40W
Power supply capacity	400mA