2AI 5V DC Mitsubishi FX3G-2AD-BD Expansion Boards for upgrade FX1N Original Brand New

FX3G-2AD-BD Mitsubishi PLC Expansion Board 0-10VDC Original Brand New

Introduction

The FX3G-2AD-BD boards for analog input(hereinafter called 2AD-BD) is an expansion board to add two analog input points.

Performance Specifications

Item	Specifications
	Voltage input	Current input
Analog input range	0 to 10V DC (Input resistance: 198.7kohm)	4 to 20mA DC (Input resistance: 250 ohm)
Maximum absolute input	-0.5V,+15V	2mA,+30mA
Digital  output	12 bits, binary	11 bits, binary
Total  accuracy	+-0.5% (+-50mV) for full scale of10V (when ambient temperature is 25°C±5°C) +-1.0% (+-100mV) for full scale of 10V (when ambient temperature is 0°C to 55°C)	+-0.5% (+-80μA) for full scale of 16mA (when ambient temperature is 25°C+-5°C) +-1.0% (+-160μA) for full scale of 16mA (when ambient temperature is 0°C to 55°C)
A/D conversion time	180us(The data will be updated at every scan time of the PLC.)
Insulation method	No insulation between each channel or the PLC.
Occupied points	0 point (This number is not related to the maximum number of input/ output points of the PLC.)

Applicable PLC

Model name	Applicability
FX3 G Series PLC	Ver. 1.10 or later

The version number can be checked by monitoring D8001 as the last three digits indicate it.

The number of connectable expansion boards varies depending on the main unit as follows:

FX3G-14M…, 24M… Main units: 1 unit

FX3G-40M…, 60M… Main units: 2 units

Never stack up two or more expansion boards

External Dimensions, Part Name