FX-10DM-E Mitsubishi PLC 5VDC Display Module Original Brand New

FX-10DM-E Mitsubishi PLC 5VDC Display Module Original Brand New

Introduction

The 10DM is mounted on the surface of the control panel or the operation panel, and connected to the programming connector of the FX Series PLC located inside the control panel or the operation panel.

The 10DM is a small display module with which you can monitor word devices of the PLC and change the data using the switches of the 10DM while looking at the display unit of 10DM.

Features

1, The STN character type liquid crystal display unit with LED backlight displays “16 characters X 2 lines”, and is easy to look at.

2, As to data registers (D), up to 2 points of 16-or 32-bit data can be displayed and changed in signed decimal numbers.

3, As to counters© and timers (T), the current value and the set value can be displayed and changed.

4, The setting of the entry monitor and the system setting information stored in the EEPROM is helped against power interruption.

5, Five mechanical keys easy to press are provided to facilitate changes of data values.

6, A word device name can be displayed in Katakana comment (Katakana, alphabet and numeric characters) written in the PLC.

7, ASCII codes can be stored in data registers of the PLC, and the 10DM can be used an easy message display unit.

Power Supply Specifications

Supply Voltage	5VDC +-5% (supplied from FX Series PLC)
Power ripple	200mV or less
Current consumption(5VDC)	220mA
Allowable instantaneous power interruption	Operation shall continue against power interruption of less than 5ms.

Performance Specifications

Display device and display colors		STN character type liquid crystal, character color: black, background color: yellowish green
Resolution and effective display size		80 X 16 dots, 11.6 X 56.2 mm
Displayed (half-width) characters		16 half-width characters X 2 lines
Visible angle range		30 degrees in left, right, up and down
Operation switches		5 mechanical keys
Built-in memory		EEPROM memory
Life time (average)	Display element	Approximately 50000 hours or more at room temperature(=250C) and room humidity (guarantee period: 1 year)
	Backlight	Yellowish green, LED backlight type, free from maintenance (guarantee period: 1 year)
External interface		RS-422 1ch

Outside Dimensions