FX-2PIF Mitsubishi Interface Module Two ports Original Brand New

FX-2PIF Mitsubishi Interface Module Two ports Original Brand New

Introduction

The FX-2PIF is an active two port communications module for use with all FX0(S), FX0N, FX, FX2C, FX2N and A series programmable controllers. The PC type selection is made by setting DIP switches. The features of the FX-2PIF include;

• The FX-2PIF allows shared access to the PCs programming port by a data access unit and one other programming or monitoring peripheral. The second peripheral can communicate to the PC on either an RS232 or a RS422 port. The active port is simply selected by a positive hardware switch. If the RS232 port is used the FX-2PIF also acts as a RS232/RS422converter.

• The FX-2PIF has been designed for use as a test and maintenance tool. The FX-2PIF has a rugged design offering a small overall size and a convenient hanging hook for temporary mounting.

General Specification

Ambient Operating Temperature	0 - 45 °C
Ambient Operating Humidity	35 - 85 % Relative Humidity, no condensation
Noise Immunity	Noise Simulation Test: 1000V square pulse, 1µs pulse width, 30 to 100 HZ frequency sweep
Maximum Dielectric Voltage Withstood	Programmable Controller I/O and power terminals subjected to 500 V AC for 1 minute
Required Operating Environment	No corrosive gases present, minimal dust
External Dimensions	132 × 86 × 37 mm (5.2 × 3.38 × 1.46 inches)
Weight	0.3 Kg (0.66 lbs)
Mounting Facilities Provided	Temporary hanging hook

Electrical Specification

Power		5 V DC, supplied by the programmable controller
Current Drawn From The 5 V DC supply When Using The Following Items With The FX-2PIF	Computer	310 mA
	FX-20P-E	340 mA
	A6-GPP	180 mA

Physical Characteristics