FX2N-5A Mit PLC 4 AI 1 AO Module New

FX2N-5A Mit PLC 4 AI 1 AO Module New

Introduction

The FX2N-5A analog special function block has four input channels and one output channel.

The input channels receive analog signals and converts them to the comparable digital values.

The output channel takes a digital value and outputs an equivalent analog signal.

1, Analog signal inputs can be selected from either voltage or current input. The applicable analog signal input is set using the TO instruction supplied by the PLC main unit.

This PLC instrution is used to select different analog input signal types for each corresponding channel.

2,The FX2N-5A can be connected to FX0N/FX1N/FX2N/FX2NC/FX3G/FX33GC/FX3U/FX3UC series PLC

3, Up to 2 FX2N-5A units can be connected to FX0N main unit, FX0N extension unit, Fx1N ,main unit.

Power supply specifications

Item	Specifications
Interface driving power supply	24VDC+-10%, 90mA (maximum), externally Supplied
CPU driving power supply	5VDC, 70mA, supplied via extension cable from PLC main unit

Perfomance specifications

Item	specifications
Conversion Speed	Channel for voltage/current input: 1ms x Number of used channels Channel for voltage/current output: 2ms (See BFM 25)
Insulation Method	Photocoupler insulates the annlog input/output area from PLC. DC/DC converter insulates the power supply from analog I/O. Channels are not insulated against each other
Number of occupied I/O points	8 points (including input and output points0
Applicable PLC	FX0N, FX1N. FX2N, FX2NC, FX3G, FX3GC, FX3U, FX3UC Series PLC For connection to the FX2NC Series PLC, an FX2NC-CNV-IF is required. For connection to the FX3GC/FX3UC Series PLC, an FX2NC-CNV-IF or FX3UC-1PS-5V is required
Built-in memory	EEPROM

External Dimensions and Parts