FX3U-232ADP Mitsubishi Communication special adapter RS-232C for FX3S FX3G FX3GC FX3U FX3UC Original Brand NEW

FX3U-232ADP Mitsubishi PLC Data Interface module Original Brand NEW

Introduction

The additional active data interface modules permit active communication between the PLC and surrounding RS232C peripherals. All device information can be sent or received via these interfaces. The module is suitable for the connection of printers, bar code readers, PCs and other PLC systems. The communication is handled by the PLC program using the RS instruction. The connection is to the communications bus on the left side of the controller. The internal serial RS422 interface is also fully available.

Specifications

	FX2NC-232ADP	FX3U-232ADP
Interface	RS232C with 9 pin D-SUB compact plug(photocoupler isolation)
Power supply	5V DC/100mA(from base unit)	5V DC/30mA(from base unit)
Communication speed* kbps	0.3 to 19.2	0.3 to 115.2
Communication distance m	Max.15	Max.15
Communication cable	Shielded cable	Shielded cable
Communication mode	Half duplex /Full Duplex	Half duplex /Full Duplex
Protocols	Computer link (dedicated protocol: format1, format4), no protocol, optional programming port
Format	7 or 8 bits, parity:none/even/odd, stop bits:1 or 2	7 or 8 bits, parity:none/even/odd, stop bits:1 or 2
Related I/O points	0	0
Weight kg	0.1	0.08
Dimensions (W x H x D) mm	19.1 x 90 x 83	17.6 x 90(106) x 81.5

Speed depends on communication method (No protocol, Dedicated protocol, Protocol for programming tool)