FX3U-4DA-ADP module 4AO Mitsubishi Original Brand NEW

FX3U-4DA-ADP Mitsubishi PLC Special Adapter Original Brand NEW

Introduction

The FX3U-4DA-ADP special adapter for analog output (hereinafter called 4DA-ADP) is a special adapter to add four analog output points.

Applicable PLC

Model name	Applicability
FX3U Series PLC	Ver. 2.20 or later (from first production)
FX3UC Series PLC	Ver. 1.20 or later (from the production manufactured in May, 2004 with SER No. 45****)
FX3G Series PLC	Ver. 1.00 or later (from first production)
FX3GC Series PLC	Ver. 1.40 or later (from first production)

Power Supply Specifications

Item	Specification
D/A conversion circuit driving power	24V DC +20%/-15%, 150mA for 24V DC Connect a 24V DC power supply to the terminal block.
Interface driving power	5V DC, 15mA 5V DC power is supplied from the internal power supply of main unit.

Performance Specifications

Item	Description
	Voltage output	Current output
Analog output range	0 to 10 V DC (External load: 5k ohm to 1M ohm)	4 to 20mA DC (External load: 500 ohm or less)
Digital input	12 bits, binary
Total accuracy	+-0.5% (+-50mV) for full scale of 10 V (when ambient temperature is 25°C±5 °C) +-1.0% (±100mV) for full scale of 10 V (when ambient temperature is 0°C to 55°C) If the external load resistance (Rs) is less than 5kΩ, the value calculated from the following formula will be added: (Addition will be 100mV per %.)	+-0.5% (+-80uA) for full scale of 16mA (when ambient temperature is 25°C±5°C) +-1.0% (+-160uA) for full scale of 16mA (when ambient temperature is 0°C to 55 °C)
D/A conversion time	FX3U/FX3UC Series PLC: 200 us (The data will be updated at every scan time of the PLC.) FX3G/FX3GC Series PLC: 250 µs (The data will be updated at every scan time of the PLC.)
Insulation method	The photocoupler is adopted to insulate the analog output area from the PLC. The DC-DC converter is adopted to insulate the power supply line from the analog output area. Channels are not insulated from each other
Occupied points	0 point (This number is not related to the maximum number of input/output points of the PLC.)

External Dimensions