AFPX-C30R FP-X C30R Panasonic PLC CPU 100~240VAC 16DI 14DO Relay 32K Steps New Original 1Year Warranty

FP-X C30R AFPX-C30R Panasonic PLC AC100-240V 16 DC input points 14 Relay output points FP-X Control Unit Original New 

 

Features:

1. High-speed Operation

The 32-bit RISC processor provides the top-level processing speed in compact PLCs, the scan time is 2 ms or less for 5,000 steps, a high-speed PLC is indispensable for enhancing the functionality of equipment.

2. Large Capacity Program Memory

FP-X, which is equipped with 32k steps*2 program memory, is ideal for fully covering the increasing functions, such as communications, positioning, and analog control. The sufficient program capacity can also support future equipment modifications.

3. Independent Comment Memory

There are difficulties with program management on a PC, such as identifying the latest program. The use of the program in the PLC of equipment in operation is often regarded as the best option. Since FP-X has an independent comment memory, all comments can be stored in the PLC together with programs, facilitating program management and maintenance.

4. Maximum Number of I/O Points

Since up to eight expansion units can be connected to one control unit, the maximum number of I/O points is 300. Furthermore, with the add-on cassette and expansion FP0 adapter connected, the number of I/O points can be increased to 382.

5. Built-in 4-axis Pulse Output (Transistor Output Type)

The transistor output type C14 comes with 3-axis while C30/60 comes with 4-axis pulse output built-in the control unit. The multi-axis control, which previously required a higher-level PLC or additional positioning unit, or two or more PLC units, can now be achieved with only one FP-X transistor output type unit in a small space at a low cost. In addition, as this type does not require a pulse I/O cassette needed for a relay output type, other function expansion cassettes such as communication or analog input can be attached for more diversified applications.

6. Modbus-RTU

Communicates with equipment compatible with Modbus-RTU

7. Expansion Cassettes

Expansion cassettes are available for Extra digital I/O, analog, motion, Ethernet, Serial communication, etc.

General Specifications

Item			Description
			Relay output type	Transistor output type
Power supply and I/O Specifications	Power supply		100 to 240 V AC (AC power), 24 V DC (DC power)
	Input		24V DC °C common
	Output		2 A	0.5 A
	Service power supply (AC power type only)		0.15 A (C14)/ 0.4 A (C30/ C60)
Performance Specifications	Number of I/O points	C14	Input: 8 points, Output: 6 points
		C30	Input: 16 points, Output: 14 points
		C60	Input: 32 points, Output: 28 points
	I/O points when expanded	C14	Max. 328 points (When using FP0 expansion units and add-on cassette)
		C30	Max. 352 points (When using FP0 expansion units and add-on cassette)
		C60	Max. 382 points (When using FP0 expansion units and add-on cassette)
	Operation speed		0.32μs/step
	Program memory		Flash ROM built-in (no battery backup required)
	Program capcity		16 ksteps (C14), 32 ksteps (C30, C60)
	Basic instructions		111
	Applied instructions		216
	Operation memory	Internal relay ®	4096 points
		Timer/counter (T/C)	1024 points
		Data register (DT)	12285 words (C14), 32765 (C30, C60)
Special functions	Pulse catch input		14 points	14 points
	Interrupt input		14 points	14 points
	Analog I/O		Input: Max. 24 ch, Output: Max. 12 ch (When using FP0 analog unit) Input: Max. 4 ch (When using add-on cassette)
	Volume input		2 points (C14/C30), 4 points (C60)
	High-speed counter	Input of main unit	Single-phase: 8 ch x Max. 10 kHz 2-phase: 4 ch Max. 5 kHz	Single-phase: 8 ch (High-speed: 4 ch, midium-speed: 4 ch) 2-phase: 4 ch (High-speed: 2 ch, midium-speed: 2ch) With high-speed single-phase: 1 ch x Max. 100 kHz 2 ch x Max. 80 kHz 3 ch x Max. 60 kHz 4 ch x Max. 50 kHz With high-speed 2-phase: 1 ch x Max. 35 kHz 2 ch x Max. 25 kHz With medium-speed single-phase: 4 ch x Max. 10 kHz each With Medium-speed 2-phase: 2 ch x Max. 5 kHz each
		when pulse I/Ocassette installed	Single-phase: 2 ch x Max. 80 kHz, 4 ch x Max. 50 kHz 2-phase: 1 ch x Max. 30 kHz, 2 ch x Max. 25 kHz	Pulse I/O cassette cannot be installed.
	Pulse output	Input of main unit	-	With high-speed 2 ch x Max. 100 kHz For linear interpolation, compositespeed: 100 kHz With medium-speed 2 ch x Max. 20 kHz For linear interpolation, compositespeed: 20 kHz
		when pulse I/Ocassette installed	1 ch x Max. 100 kHz, 2ch x Max. 80 kHz	Pulse I/O cassette cannot be installed.
	Serial interface		RS232C.RS485, USB, Ethernet
	Network function		PLC Link, Computer link, Modem, Modbus-RTU
Other functions			Program editing during RUN, Constant scan, 8-digit password, Program

Control Units

Model Name	Power	Pulse Outputs	Modbus Rtu	Dc Inputs	Npn Outputs	Pnp Outputs	Relay Outputs	Program Size (K)
AFPX-C14P	AC100-240V	3 Axis	Yes	8		6		12
AFPX-C14PD	24VDC	3 Axis	Yes	8		6		12
AFPX-C14R	AC100-240V	No	Yes	8			6	12
AFPX-C14T	AC100-240V	3 Axis	Yes	8	6			12
AFPX-C14TD	24VDC	3 Axis	Yes	8	6			12
AFPX-C30P	AC100-240V	4 Axis	Yes	16		14		32
AFPX-C30PD	24VDC	4 Axis	Yes	16		14		32
AFPX-C30R	AC100-240V	No	Yes	16			14	32
AFPX-C30T	AC100-240V	4 Axis	Yes	16	16			32
AFPX-C30TD	24VDC	4 Axis	Yes	16	16			32
AFPX-C60P	AC100-240V	4 Axis	Yes	32		28		32
AFPX-C60PD	24VDC	4 Axis	Yes	32		28		32
AFPX-C60R	AC100-240V	No	Yes	32			28	32
AFPX-C60T	AC100-240V	4 Axis	Yes	32	28			32
AFPX-C60TD	24VDC	4 Axis	Yes	32	28			32