1734-CTM AB Allen-Bradley PLC 250V single-slot 12 mm Termination Modules 1734 Series Original brand new

1734-CTM AB PLC 250V single-slot 12 mm Termination Modules 1734 Series Original brand new

Terminal Base Assemblies and RTBs
A Terminal Base Assembly consists of a POINT I/O mounting base and a separate removable terminal block (RTB) that plugs into the mounting base. The base mounts directly on the DIN rail, either vertically or horizontally, and includes user-selectable mechanical keying to prevent incorrect I/O module placement. The RTB plugs into the mounting base and provides the terminal locations for field wiring. It also provides vertical access to wire and screw terminations. The I/O module plugs into the mounting base above the RTB. The RTB separates independently from the mounting base and I/O module to facilitate rapid installation and commissioning of the system. Spare or replacement RTBs can be ordered separate from the terminal base assembly.
Alternatively, a POINT I/O one-piece mounting base, which includes integrated terminal locations, is also available. The I/O module plugs into the one-piece mounting base.

Termination Modules
The POINT I/O Common Terminal Module and Voltage Terminal Module provide expansion of the termination capability of POINT I/O. The modules support higher density (8 channel) POINT I/O modules and management of wiring of field devices to the POINT I/O solution.

Cat. No.	Description			Quantity
1734-CTM	Common Terminal Module. Single-slot 12 mm wide Common Terminal Modules.			10
1734-VTM	Voltage Terminal Module. Single-slot 12 mm wide Voltage Terminal Modules.			10
Cat. No.	Keyswitch Position	Isolation Voltage	Field Power Supply Voltage Range	Field Power Supply Current, Max.
1734-CTM	5	250V (continuous), Basic Insulation Type Type tested at 1600V DC for 60 s, field-side to system	10…28.8V DC, 120/240V AC	2 A per point, 4 A module
1734-VTM