1756-OW16I Allen-Bradley PLC 16 Channel N.O Isolated Relay Output Module (36 Pin) New

1756-OW16I Allen-Bradley PLC 16 Channel N.O Isolated Relay Output Module (36 Pin) New

If you need more than 10pcs and want to get better wholesale price, please feel free to contact us by following:
email:[email protected]
Tel:0086-574-88333153
We will quote you our best price to you in 24hours.

PLCAGE: 1756-OW16I  Allen-Bradley PLC 16 Channel N.O Isolated Relay Output Module (36 Pin) New

Feature

The 1756 digital I/O modules support these features.

Variety of voltage interface capabilities

Isolated and nonisolated module types

Point-level output fault states

Direct-connect or rack-optimized communication

Field-side diagnostics on select modules

Specification

Outputs	16 N.O. individually isolated
Pilot duty	C300/R150
Operating voltage range	5-25V DC 10-40V AC
Output voltage range (load dependent)	2 A @ 5-0V DC 0.5 A @ 48V DC 0.25 A @ 125V DC 2 A @ 125/240V AC
Output delay time Off to On On to Off	10 ms max 10 ms max
Current draw @ 5.1V	150 mA
Current draw @ 24V	150 mA
Total backplane power	4.4 W
Power dissipation, max	4.5 W @ 60°C (140 ?)
Thermal dissipation	15.35 BTU/hr
Off-state leakage current per point, max	1.5 mA per point
Minimum load current	10 mA per point
Initial contact resistance, max	100 mOhm? @ 6V 1 A
Switching frequency, max	1 operation/3 s (0.3 Hz at rated load)
Bounce time, mean	1.2 ms
Expected contact life	300 K cycles resistive 100 K cycles inductive
Scheduled outputs	Synchronization within 16.7 s max, reference to the Coordinated System Time
States in Fault mode per point	Hold last state, On or Off (Off is default)
States in Program mode per point	Hold last state, On or Off (Off is default)
Isolation voltage	250V (continuous), basic insulation type, outputs-to-backplane, and output-to-output Routine tested @ 1350V AC for 2 s
Module keying	Electronic, software configurable
Fusing	Not protected. A fused IFM can be used to protect outputs. See publication 1492-TD008. However, the ControlLogix system has been agency certified using only the ControlLogix RTBs, that is, 1756-TBCH, 1756-TBNH, 1756-TBSH, and 1756-TBS6H. Any application that requires agency certification of the ControlLogix system using other wiring termination methods may require application-specific approval by the certifying agency.
Removable terminal block	1756-TBCH 1756-TBS6H
RTB keying	User-defined mechanical
Slot width	1
Wire category	1(1)
North American temperature code	T4A
Enclosure type	None (open-style)