DVP04AD-E2 Delta PLC 4 point 14-bit resolution Analog I/O Module Original brand new

DVP04AD-E2 Delta PLC 4 point 14-bit resolution Analog I/O Module Original brand new

Introduction

DVP04AD-E2 analog input module receives external 4 points of analog input signals (voltage or current) and converts them into 16-bit digital signals. You can select voltage input or current input by the wiring. In addition, you can access the data in the module by applying FROM/TO instructions or read the average value of channels directly by using MOV instruction (Please refer to allocation of special registers D9900 ~ D9999).

Electrical Specifications

Analog / Digital module (04A/D)
Power supply voltage	24VDC (20.4VDC ~ 28.8VDC) (-15% ~ +20%)
Max. rated power consumption	1W, supplied by external power source
Connector	European standard removable terminal block (Pin pitch: 5mm)
Operation/storage temperature	Operation: 0°C~55°C (temp.), 5~95% (humidity), Pollution degree2 Storage: -25°C~70°C (temp.), 5~95% (humidity)
Vibration/shock immunity	International standards: IEC61131-2, IEC 68-2-6 (TEST Fc)/ IEC61131-2 & IEC 68-2-27 (TEST Ea)
Series connection to DVP-PLC MPU	The modules are numbered from 0 to 7 automatically by their distance from MPU. Max. 8 modules are allowed to connect to MPU and will not occupy any digital I/O points.

Functions

Analog / Digital module	Voltage input		Current input
Analog input channel	4 channels / each module
Range of analog input	+-10V	+-5V	+-20mA	0 ~ 20mA	4 ~ 20mA
Range of digital conversion	+-32,000	+-32,000	+-32,000	0 ~ 32,000	0 ~ 32,000
Max./Min. range of digital data	+-32,384	+-32,384	+-32,384	-384~+32,384	-384~+32,384
Hardware Resolution	14 bits	14 bits	14 bits	13 bits	13 bits
Input impedance	>=1M?		250?
Range of absolute input	+-15V		+-32mA
Overall accuracy	+-0.5% when in full scale (25°C, 77°F) +-1% when in full scale within the range of 0 ~ 55°C (32 ~ 131°F)
Response time	400us / each channel
Digital data format	2’s complement of 16 bits
Average function	Supported. Available for setting up sampling range in CR#8 ~ CR#11. Range: K1 ~ K100.
Self-diagnosis	Upper and lower bound detection in all channels
Isolation method	Optical coupler isolation between digital circuits and analog circuits. No isolation among analog channels. 500VDC between digital circuits and Ground 500VDC between analog circuits and Ground  500VDC between analog circuits and digital circuits  500VDC between 24VDC and Ground

Product Profile & Dimension