ECMA-E11310SS+ASD-A2-1021-M Delta 220V 1kW 4.77NM 2000r/min 130mm AC Servo Motor Drive kit break Keyway with 3M Cable

ECMA-E11310SS+ASD-A2-1021-M Delta 220V 1kW 4.77NM 2000r/min 130mm AC Servo Motor Drive kit break Keyway with 3M Cable

Motor+ Drive: ECMA-E11310SS+ASD-A2-1021-M

1 Motor Specifications

Model	ECMA-E11310SS
Product Name	Electronic Commutation Motor
Servo Type	AC Servo
Name of the Series	A2
Rated Voltage	220V
Encoder Type	Incremental type,20-bit
Motor Frame Size	130 mm
Type of Shaft Diameter and Oil Seal	Keyway (with fixed screw holes), with brake, with oil seal
Standard Shaft Diameter	S=22mm
Rated Power Output	1.0 KW
Rated torque (N-m)	4.77
Max. torque (N-m)	14.32
Rated Speed (rpm)	2000
Max. speed (rpm)	3000
Rated current (A)	5.6
Max. instantaneous current (A)	16.8
Power rating (kW/s)	27.1
Rotor inertia (× 10-4kg.m2)	8.41
Mechanical constant (ms)	1.51
Torque constant-KT (N-m/A)	0.85
Voltage constant-KE (mV/(r/min))	31.9
Armature resistance (Ohm)	0.47
Armature inductance (mH)	5.99
Electric constant (ms)	12.88
Insulation class	Class A (UL), Class B (CE)
Insulation resistance	> 100 M ohm , DC 500 V
Insulation strength	1.8k Vac, 1 sec
Weight (kg) (with brake)	8.4Kg
Radial max. loading (N)	490
Axial max. loading (N)	98
Power rating (kW/s) (with brake)	24.9
Rotor inertia (× 10-4kg.m2) (with brake)	9.14
Mechanical constant (ms) (with brake)	1.64
Brake holding torque Nt-m(min)]	10
Brake power consumption (at 200C) [W]	19
Brake release time [ms (Max)]	10
Brake pull-in time [ms (Max)]	70
Vibration grade (μm)	15
Operating temperature	0~40 degree centigrade
Storage temperature	-10~80 degree centigrade
Operating humidity	20~90% RH Non-condensate
Storage humidity	20~90% RH Non-condensate
Vibration capacity	2.5G
IP Rating	IP65
Approvals	CE UL

2 .Drive Specifications

Model				ASD-A2-1021-M
Product Name				AC SERVO Drive
Series				A2
Power	Phase / Voltage			Three-phase / Single-phase 220 VAC
	Permissible Voltage			Three-phase / Single-phase  200 ~ 230 VAC, -15% ~ 10%
	Continuous Output Current			7.3Arms
Cooling method				Fan cooling
Model Type				Full-Closed Control CANopen E-CAM
Encoder Resolution  (Servo Drive Resolution)				Incremental type: 20-bit (1280000 p/rev) ; Absolute type: 17-bit (1280000 p/rev)
Main Circuit Control				SVPWM (Space Vector Pulse Width Modulation) Control
Control Mode				Auto / Manual
Dynamic Brake				Built-in
Position Control Mode		Max. Input Pulse Frequency		Max. 500Kpps / 4Mpps (Line driver), Max. 200Kpps (Open collector)
		Pulse Type		Pulse + Direction, A phase + B phase, CCW pulse + CW pulse
		Command Source		External pulse / Register
		Smoothing Strategy		Low-pass and P-curve filter
		E-gear ratio		E-gear ratio N/M multiple N: 1~32767, M: 1:32767 (1/50 < N/M < 25600)
		Torque Limit		Parameter settings
		Feed Forward Compensation		Parameters settings
Speed Control Mode		Analog Command Input	Voltage Range	0 ~ ±10 VDC
			Input Resistance	10 K ohm
			Time Constant	2.2 us
		Speed Control Range*1		1 : 5000
		Command Source		External analog command / Register
		Smoothing Strategy		Low-pass and S-curve filter
		Torque Limit		Via parameter setting or analog input
		Bandwidth		Maximum 1 kHz
		Speed Accuracy*2		0.01% or less at 0 to 100% load fluctuation
				0.01% or less at ±10% power fluctuation
				0.01% or less at 0 to 50 degree centigrade ambient temperature fluctuation
Torque Control Mode		Analog Command Input	Voltage Range	0 ~ ±10 VDC
			Input Resistance	10 K ohm
			Time Constant	2.2 us
		Command Source		External analog command / Register
		Smoothing Strategy		Low-pass filter
		Speed Limit		Via parameter setting or analog input
Analog Monitor Output				Monitor signal can set by parameters (Output voltage range: ±8 V)
Communication Interface				RS-232 / RS-485 / USB