Leadshine 200W brushless AC servo set (drive ACS806 + motor ACM602V36-2500) New

Leadshine 200W brushless AC servo set (drive ACS806 + motor ACM602V36-2500) New

PLCAGE: Leadshine Brushless Servo Drive ACS Series ACS806 DC18-80V Cont. 6A Peak 18A 400W for 50-400W Servo Motor New

Features:

*Advance DSP current control technology

*Step & direction, or CW/CCW control

*High precision; smooth and quiet motor movement

*Input voltage: 18 - 80 VDC 

*Continuous current: 6 A

*Peak current: 18A

*Capable of driving 20 - 400 W brushless servo motors

*Electronic gear rate from 1/255 to 255

*Built-in motion profile for testing with trapezoidal velocity profile

*Opto-isolated

*Encoder output with signals A, B, and Z (indexing)

*Limit switch input

*Fault, and in position (at preset target position) outputs

*Small size, surface-mount technology

Specifications:

Parameters	Min	Typical	Max	Unit
Peak output current	0	-	18	A
Continue output current	0	-	6	A
Supply voltage	+18	-	+80	VDC
Logic signal current	7	10	16	mA
Pulse input frequency	0	-	600	kHz
Isolation resistance	500			MΩ
Current provided to encoder	-	-	100	mA

Matching motors:

Power	Models
100W	ACM601V36
200W	ACM602V36, ACM602V36A, ACM602V60, ACM602V60A
400W	ACM604, ACM604V60

Applications:

Suitable for large and medium automation machines and equipments, such as inkjet printers, engraving machines, electronic manufacturing equipments, special NC machines, pick and place devices, packing devices, and so on. Particularly adapt to the applications require high speed, high precision, and low motor noise.

 

PLCAGE: Leadshine Brushless Servo Motor ACM Series ACM602V36-2500 36V 200W 0.64N.M 3000rpm 60mm New

Features:

*Brushless construction, reliable industrial quality

*High torque density, and optimized for quick response

*60mm frame size, 36 VDC rated voltage, 200W rated power

*10000 CPR (2500-line) increamental encoder with A, B, indexing signals

*0.64 N-m (90 oz-in) rated torque / 1.91 N-m (270 oz-in) peak

*3000 RPM rated speed / 4000 RPM peak

*Standard cabling options for direct connection to the ACS series servo drives

Specifications:

Model	ACM601V36	ACM602V36(A)*	ACM602V60(A)*	ACM604V60	ACM602V36-30	ACM604V60-30
Rated Voltage (V)	36	36	60	60	36	36
Rated Power (W)	100	200	200	400	200	400
Rated Torque (N.M)	0.318	0.64	0.64	1.27	0.64	1.27
Peak Torque (N.M)	0.95	1.91	1.91	3.82	1.92	3.81
Rated Speed (RPM)	3000	3000	3000	3000	3000	3000
Peak Speed (RPM)	4000	4000	4000	4000	4000	4000
Rated Current (A)	4	7.6	4.7	8.4	7.6	8.4
Peak Current (A)	11	22	14	25	22	25
Torque Const. (N.M/A)	0.0866	0.0918	0.15	0.161	0.084	0.151
Back EMF Const. (V/RPM)	3.03 x 10-3	3.213 x 10-3	5.24 x 10-3	5.54 x 10-3	3.2 x 10-3	5.5 x 10-3
Resistance (ohm)	0.38	0.16	0.38	0.19	0.39	0.28
Inductance (mH)	0.91	0.41	1.07	0.59	0.33	0.34
Inertia (kgm2 x 10-4 )	0.1032	0.176(0.178)	0.176(0.178)	0.3549	0.32	0.46
Allowable radial load (N)	78.6	245	245	245	245	245
Allowable axial load (N)	38.2	68	68	74	68	74
Flange Size (mm)	60	60	60	60	60	60
Mounting Diameter (mm)	70	70	70	70	70	70
Shaft Diamter (mm)	8	11(14)	11(14)	14	11	14
Motor Length (mm)	86.7	100.7	100.7	127.8	123	143
Pole Pairs (-)	4	4	4	4	4	4
Encoder Res. (counts/rev.)	2500**	2500**	2500**	2500**	1000**	1000**
Mass (Kg)	0.701	0.966	0.984	1.463	0.95	1.48
Ambient Temperature (°C)	0~40	0~40	0~40	0~40	0~40	0~40

* The ACM602V36(A) means two models. The ACM602V36 and ACM602V36A which is different from the former in inertia and shaft diameter.

** Standard. Other configurations available.

Matching drives:

Model	Matching Drives
100 W AC Servo Motors	ACS806
200 W AC Servo Motors	ACS806
400 W AC Servo Motors	ACS806, EL5-D400