Leadshine Differential Brushed DC Servo Drive DCS810 DC18-80V Cont. 10A Peak 20A for 20-400W Brush DC Servo Motor New

Leadshine Differential Brushed DC Servo Drive DCS810 DC18-80V Cont. 10A Peak 20A for 20-400W Brush DC Servo Motor New

The DCS810 is a digital DC servo driver developed with DSP and high efficient MOSFET technologies. In position control, it's easy for the end users to change stepping drivers to the DCS810 without changing control systems, because its input command is PUL/DIR signal, which is compatible with that of stepping drivers. In low power motion control applications, performances of DC servo systems using the DCS810 are better than those of digital AC servo systems in velocity, precision, noise, stability, or at least as good as those of digital AC servo systems. However, the cost of the DCS810 stays at the price line of stepping driver, namely far lower than those of AC servo drivers.

 

Compared to the DCS810S, the DCS810 can accept differential control signals and differential encoder feedback signals, offering better anti-interference performances. Compared to the DB810A, parameter visible tuning tools make the DCS810 much easier to tune.

 

The DCS810 is very easy to tune and all parameters are visible. Parameter visible tuning tools, including Pro Tuner (Windows based setup software) and STU (Small servo tuning unit) can meet different tuning environments or requirements.

 

Features:

*18-80VDC, 0-20A, 20-400W. 

*Based on DSP control technology and high smooth servo control algorithm. 

*Parameter visible tuning tools, including Pro Tuner and STU. 

*Feedback resolution X4 encoder line count. 

*Position Following error lock range adjustable 

*Position error can be eliminated to 1 count, and Velocity error can be eliminated to the Desired Velocity* 0.3% 

*Electronic gear ratio from 1/255 to 255 

*Built-in motion controller for self-test with trapezoidal velocity profile 

*Support PUL/DIR and CW/CCW control signals 

*Opto-isolated inputs, support single-ended and differential signals 

*10 latest errors self-record function  

*Over-current, over-voltage, under-voltage, phase error, encoder error, position following error protections

*Small size, surface-mount technology

 

Specifications:

Parameters	Min	Typical	Max	Unit
Peak output current	0	-	20	A
Supply voltage	+18	-	+80	VDC
Logic signal current	7	10	15	mA
Pulse input frequency	0	-	500	kHz
Isolation resistance	500			MΩ
Current provided to encoder	-	-	50	mA

Matching motors:

Drive number	DCS303	DCS810	DCS810S
Motors	18-30VDC brush DC servo motors with single-ended encoder, power up to 90W	18-80VDC brush DC servo motors with differential encoder, power up to 400W	18-80VDC brush DC servo motors with single-ended encoder, power up to 400W

 

Applications:

Suitable for a wide range of equipments and instruments such as mini type

engraving machines, jet-ink machines, etc. It performs better in equipments desired

for low noise, high velocity, high precision and high reliability

 

Other hot items of this Leadshine Brushed servo drives for above applications:

DCS303	Leadshine Micro-size Brushed DC Servo Drive DCS303 DC18-30V Cont. 3A Peak 15A for 5-90W Brush DC Servo Motor New
DCS810	Leadshine Differential Brushed DC Servo Drive DCS810 DC18-80V Cont. 10A Peak 20A for 20-400W Brush DC Servo Motor New
DCS810S	Leadshine Single-ended Brushed DC Servo Drive DCS810S DC18-80V Cont. 10A Peak 20A for 20-400W Brush DC Servo Motor New